AIRGUARD
Glitch953·AIRGUARD·hardware/kicad/New_Board.kicad_pcb
About the AIRGUARD PCB
AIRGUARD is an open source ESP32 PCB design by Glitch953, published on GitHub. It is a 2-layer board measuring 68.8 × 50 mm, with 28 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the AP2112K-3.3TRG1 and CMT-8540S-SMT-TR. By type, the board carries 8 resistors, 6 switches, 6 capacitors, 3 ICs, 3 connectors and 2 diodes.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
A portable, privacy-focused Wi-Fi environment analyzer based on the ESP32-S3. AIRGUARD scans nearby Wi-Fi networks using the ESP32-S3 MicroPython WLAN API and displays network metadata (SSID, channel, RSSI and security type) on an SSD1306 OLED. The current WLAN.scan() implementat
A portable, privacy-focused Wi-Fi environment analyzer based on the ESP32-S3. AIRGUARD scans nearby Wi-Fi networks using the ESP32-S3 MicroPython WLAN API and displays network metadata (SSID, channel, RSSI and security type) on an SSD1306 OLED. The current WLAN.scan() implementation is not verified as passive-only.
This repository is a design-stage prototype package, not a validated manufacturing release. The KiCad source files are included for review and continued development. The PCB copper layout has not been rerouted in this package, and no KiCad ERC/DRC validation or hardware test is…

Main components on the AIRGUARD
AIRGUARD bill of materials (BOM)
28 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8 | ESP32-S3-WROOM-1 | U1 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U2 |
| 1 | CMT-8540S-SMT-TR | Buzzer_Murata_PKMCS0909E | U3 |
| 1 | USB4085-GF-A | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | OLED Header | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 6 | SKRPACE010 | SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | PRTR5V0U2X,215 | SOT-143 | D1, D2 |
| 2 | 10UF 10uF | C_0603_1608Metric | C1, C2 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C3, C4, C5 |
| 1 | 1UF 1uF | C_0603_1608Metric | C9 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 22 | R_0603_1608Metric | R3, R4 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R5, R6 |
| 1 | 4.7k | R_0603_1608Metric | R7 |
| 1 | 10K 10k | R_0603_1608Metric | R12 |
AIRGUARD design files
The KiCad project lives in the Glitch953/AIRGUARD repository on GitHub; these links point at the commit this page was built from.
AIRGUARD: common questions
What microcontroller does the AIRGUARD use?
The AIRGUARD is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How big is the AIRGUARD PCB?
The AIRGUARD measures 68.8 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AIRGUARD?
28 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AIRGUARD design files?
From the Glitch953/AIRGUARD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AIRGUARD design in my own project?
The repository has no license, so all rights stay with Glitch953. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AIRGUARD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k