I2c sensors
About the I2c sensors PCB
I2c sensors is an open source PCB design by GNB-UAM, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 11.1 × 17.4 mm, with 8 components from 7 distinct parts.
Other key parts include the BMXX80 and SHT21. By type, the board carries 2 ICs, 2 resistors, 1 connector, 1 jumper, 1 inductor and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
Artificial nose design with multimodal sensing capabilities
These are experimental designs. Use at your own risk.
Please see Bibtex and other citation options at the bottom of the page.
For hardware: Attribution-ShareAlike 4.0 International
Scientific papers: - Garcia-Saura C., Rodriguez-Lujan I., Serrano E., Rodríguez F.B. and Varona P., At-home monitorization using artificial noses and multimodal sensors: a noninvasive approach to human routine certification. IBJ Plus 2022 1(s5) e00017. DOI: 10.24217/2531- 0151.22v1s5.00017. https://doi.org/10.24217/2531-0151.22V1S5.00017
Main components on the I2c sensors
I2c sensors bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BMXX80 | BME280 | U2 |
| 1 | SHT21 | DFN-6-1EP_3x3mm_Pitch0.95mm | U4 |
| 1 | i2c | Pin_Header_Straight_1x04_Pitch2.54mm | J1 |
| 1 | Jumper_NC_Dual | Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | L | L_0805 | L1 |
| 1 | C | C_0805 | C1 |
| 2 | R | R_0805 | R2, R3 |
I2c sensors design files
The KiCad project lives in the GNB-UAM/UAMSense repository on GitHub; these links point at the commit this page was built from.
I2c sensors: common questions
How big is the I2c sensors PCB?
The I2c sensors measures 11.1 × 17.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2c sensors?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the I2c sensors design files?
From the GNB-UAM/UAMSense repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the I2c sensors design in my own project?
Yes, under the terms of its GPL-3.0 license, which GNB-UAM chose for the repository.
More boards in UAMSense
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956
ButtonsLEDs
390 × 37 mm82 parts2LApache-2.0956