Charger SubBoard 0-2
About the Charger SubBoard 0-2 PCB
Charger SubBoard 0-2 is an open source PCB design by Govish, published on GitHub under the MIT license. It is a 2-layer board measuring 27.9 × 65.4 mm, with 58 components from 24 distinct parts.
Other key parts include the INA180B and LTC3783. By type, the board carries 21 resistors, 11 capacitors, 10 test points, 5 transistors, 5 connectors and 3 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Design files and documentation for the FusIon Battery Pack
Main components on the Charger SubBoard 0-2
Charger SubBoard 0-2 bill of materials (BOM)
58 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA180B | SOT-23-5_HandSoldering | U1 |
| 1 | LTC3783 | TSSOP-16-1EP_4.4x5mm_P0.65mm | U2 |
| 2 | RUC002N05HZGT116 | SOT-23 | Q1, Q4 |
| 2 | SQJ479EP | Vishay_PowerPAK_1212-8_Single | Q2, Q5 |
| 1 | TK7S10N1Z | TO-252-2 | Q3 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1, J2, J4, J5 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 10 | TestPoint_Probe | TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +2 |
| 2 | 12V | D_SOD-323_HandSoldering | D1, D3 |
| 1 | 5A >50V | D_SMA_Handsoldering | D2 |
| 1 | 22uH | l_Sumida_104CDM | L1 |
| 3 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C4 |
| 1 | 10u | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 2 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C8 |
| 1 | 4u7 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 47u | CP_Radial_D10.0mm_P5.00mm | C7 |
| 3 | 10n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9, C10, C11 |
| 5 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R5, R8, R18, R20 |
| 2 | 240K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R19 |
| 6 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R10, R11, R14, R15, R21 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 200R 1W | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R4, R6 |
| 1 | 390 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 2 | 20mR 3/4W | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R9, R12 |
| 3 | 33K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R16, R17 |
Charger SubBoard 0-2 design files
The KiCad project lives in the Govish/FusIon-Pack repository on GitHub; these links point at the commit this page was built from.
Charger SubBoard 0-2: common questions
How big is the Charger SubBoard 0-2 PCB?
The Charger SubBoard 0-2 measures 27.9 × 65.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Charger SubBoard 0-2?
58 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Charger SubBoard 0-2 design files?
From the Govish/FusIon-Pack repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Charger SubBoard 0-2 design in my own project?
Yes, under the terms of its MIT license, which Govish chose for the repository.
More boards in FusIon-Pack
STM32FusIon Pack
162 × 154 mm319 parts4LMIT0
AFE SubBoard 0-2
52.1 × 81.3 mm117 parts2LMIT0
PowerStage SubBoard 0-2
53.3 × 38.1 mm71 parts2LMIT0
USB LED Daughterboard 0-2
63.5 × 25.4 mm61 parts2LMIT0
AVR/ArduinoButtonInterfaceBoard 0-2
36.8 × 47 mm36 parts2LMIT0
Buck Converter SubBoard 0-2
46.4 × 25.4 mm33 parts2LMIT0
Fusion USB Daughter Board
72.5 × 33.3 mm28 parts2LMIT0
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k