USB LED Daughterboard 0-2
About the USB LED Daughterboard 0-2 PCB
USB LED Daughterboard 0-2 is an open source PCB design by Govish, published on GitHub under the MIT license. It is a 2-layer board measuring 63.5 × 25.4 mm, with 61 components from 21 distinct parts.
Other key parts include the STUSB4500 and PCA9685PW. By type, the board carries 28 resistors, 13 diodes, 7 test points, 6 capacitors, 4 connectors and 2 ICs.
It belongs with the power & battery designs in this gallery.
From the project
Design files and documentation for the FusIon Battery Pack
Main components on the USB LED Daughterboard 0-2
USB LED Daughterboard 0-2 bill of materials (BOM)
61 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500 | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U1 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U2 |
| 1 | SQJ479EP | Vishay_PowerPAK_SO-8 | Q1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_TE_2305018-2 | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 7 | TestPoint_Probe | TestPoint_Keystone_5000-5004_Miniature | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 1 | PACDN042Y3R | SOT-23 | D1 |
| 1 | SESDONCAN1LT1G | SOT-23 | D2 |
| 5 | RED | LED_0603_1608Metric_Castellated | D3, D4, D5, D6, D7 |
| 1 | PDZ12BGWJ | D_SOD-123 | D8 |
| 5 | Wurth_155124M173200 | LED_RGB_Wurth_1204_Right | D9, D10, D11, D12, D13 |
| 5 | 1u | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 1 | 100n | C_0603_1608Metric | C6 |
| 1 | 100R | R_0603_1608Metric | R1 |
| 4 | 1K | R_0603_1608Metric | R2, R11, R12, R13 |
| 2 | 240K | R_0603_1608Metric | R3, R10 |
| 5 | 390R | R_0603_1608Metric | R4, R5, R6, R7, R8 |
| 1 | 10K | R_0603_1608Metric | R9 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 15 | 75R | R_0603_1608Metric | R14, R15, R16, R17, R18, R19, R20, R21 +7 |
USB LED Daughterboard 0-2 design files
The KiCad project lives in the Govish/FusIon-Pack repository on GitHub; these links point at the commit this page was built from.
USB LED Daughterboard 0-2: common questions
How big is the USB LED Daughterboard 0-2 PCB?
The USB LED Daughterboard 0-2 measures 63.5 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB LED Daughterboard 0-2?
61 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB LED Daughterboard 0-2 design files?
From the Govish/FusIon-Pack repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USB LED Daughterboard 0-2 design in my own project?
Yes, under the terms of its MIT license, which Govish chose for the repository.
More boards in FusIon-Pack
STM32FusIon Pack
162 × 154 mm319 parts4LMIT0
AFE SubBoard 0-2
52.1 × 81.3 mm117 parts2LMIT0
PowerStage SubBoard 0-2
53.3 × 38.1 mm71 parts2LMIT0
Charger SubBoard 0-2
27.9 × 65.4 mm58 parts2LMIT0
AVR/ArduinoButtonInterfaceBoard 0-2
36.8 × 47 mm36 parts2LMIT0
Buck Converter SubBoard 0-2
46.4 × 25.4 mm33 parts2LMIT0
Fusion USB Daughter Board
72.5 × 33.3 mm28 parts2LMIT0
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k