Fusion USB Daughter Board
About the Fusion USB Daughter Board
Fusion USB Daughter Board is an open source PCB design by Govish, published on GitHub under the MIT license. It is a 2-layer board measuring 72.5 × 33.3 mm, with 28 components from 11 distinct parts.
Other key parts include the FUSB302BMPX and PCA9685PW. By type, the board carries 16 resistors, 5 diodes, 3 capacitors, 2 ICs and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Design files and documentation for the FusIon Battery Pack
Main components on the Fusion USB Daughter Board
Fusion USB Daughter Board bill of materials (BOM)
28 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSB302BMPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U1 |
| 1 | PCA9685PW | TSSOP-28_4.4x9.7mm_P0.65mm | U2 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_TE_2305018-2 | J1 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Horizontal | J2 |
| 5 | LED_ARGB | LED_RGB_Wurth_1204_Right | D1, D2, D3, D4, D5 |
| 2 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3 |
| 1 | 4u7 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 5 | 68R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R5, R8, R11, R14 |
| 5 | 27R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R6, R9, R12, R15 |
| 5 | 15R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R7, R10, R13, R16 |
Fusion USB Daughter Board design files
The KiCad project lives in the Govish/FusIon-Pack repository on GitHub; these links point at the commit this page was built from.
Fusion USB Daughter Board: common questions
How big is the Fusion USB Daughter Board?
The Fusion USB Daughter Board measures 72.5 × 33.3 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Fusion USB Daughter Board?
28 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Fusion USB Daughter Board design files?
From the Govish/FusIon-Pack repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Fusion USB Daughter Board design in my own project?
Yes, under the terms of its MIT license, which Govish chose for the repository.
More boards in FusIon-Pack
STM32FusIon Pack
162 × 154 mm319 parts4LMIT0
AFE SubBoard 0-2
52.1 × 81.3 mm117 parts2LMIT0
PowerStage SubBoard 0-2
53.3 × 38.1 mm71 parts2LMIT0
USB LED Daughterboard 0-2
63.5 × 25.4 mm61 parts2LMIT0
Charger SubBoard 0-2
27.9 × 65.4 mm58 parts2LMIT0
AVR/ArduinoButtonInterfaceBoard 0-2
36.8 × 47 mm36 parts2LMIT0
Buck Converter SubBoard 0-2
46.4 × 25.4 mm33 parts2LMIT0
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k