StepUP lcd
Govish·stepUP-Electronics-2-0·stepUP LCD Panel/stepUP_lcd/stepUP_lcd.kicad_pcb
About the StepUP lcd PCB
StepUP lcd is an open source PCB design by Govish, published on GitHub. It is a 2-layer board measuring 180 × 90 mm, with 27 components from 15 distinct parts.
Other key parts include the P82B715 and MCP23017_SS. By type, the board carries 14 resistors, 3 connectors, 3 diodes, 2 ICs, 2 capacitors and 1 buzzer.
It belongs with the displays & leds and robotics & motion designs in this gallery.
Main components on the StepUP lcd
StepUP lcd bill of materials (BOM)
27 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | P82B715 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MCP23017_SS | SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Shrouded | J1 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical_SMD | J2 |
| 1 | Conn_01x18 | PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | Buzzer | Buzzer_CUI_CPT9019S | BZ1 |
| 1 | MountingHole | RGB_Encoder_Hole | H1 |
| 1 | R_POT | Potentiometer_Vishay_TS53YJ | RV1 |
| 3 | LED | LED_1206ReverseMount | D1, D2, D3 |
| 2 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3 |
| 2 | 4K7 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3 |
| 1 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 3 | 0R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5, R6 |
| 6 | 390R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R9, R10, R11, R12 |
| 2 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R101, R102 |
StepUP lcd design files
The KiCad project lives in the Govish/stepUP-Electronics-2-0 repository on GitHub; these links point at the commit this page was built from.
StepUP lcd: common questions
How big is the StepUP lcd PCB?
The StepUP lcd measures 180 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the StepUP lcd?
27 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the StepUP lcd design files?
From the Govish/stepUP-Electronics-2-0 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the StepUP lcd design in my own project?
The repository has no license, so all rights stay with Govish. Use it as a reference, and ask the author before reusing the design.
More boards in stepUP-Electronics-2-0
ESP32
Quickstep controller
Govish
192.5 × 165 mm235 parts2LNo license0ESP32
Quickstep controller RevII
Govish
192.5 × 165 mm235 parts2LNo license0Extruder breakout
Govish
29 × 50 mm13 parts2LNo license0Heatbed breakout
Govish
85 × 28 mm5 parts2LNo license0RGB endstop breakout
Govish
40 × 35 mm4 parts2LNo license0USB Adapter
Govish
17.8 × 10.2 mm4 parts2LNo license0Gantry x motor breakout
Govish
85.8 × 84.3 mm3 parts2LNo license0Y z motor endstop breakout
Govish
29 × 35 mm3 parts2LNo license0
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k