Extruder breakout
Govish·stepUP-Electronics-2-0·adapter_boards/extruder_breakout/extruder_breakout.kicad_pcb
About the Extruder breakout
Extruder breakout is an open source PCB design by Govish, published on GitHub. It is a 2-layer board measuring 29 × 50 mm, with 13 components from 7 distinct parts.
By type, the board carries 7 connectors, 3 diodes and 3 resistors.
It belongs with the dev boards & breakouts and robotics & motion designs in this gallery.
Extruder breakout bill of materials (BOM)
13 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_XT | XT30U-F | J1 |
| 1 | Conn_02x08_Odd_Even | IDC-Header_2x08_P2.54mm_Vertical | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_TE_2.54mmx02 | J3 |
| 1 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 3 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5, J6, J7 |
| 3 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 3 | 2K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3 |
Extruder breakout design files
The KiCad project lives in the Govish/stepUP-Electronics-2-0 repository on GitHub; these links point at the commit this page was built from.
Extruder breakout: common questions
How big is the Extruder breakout?
The Extruder breakout measures 29 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Extruder breakout?
13 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Extruder breakout design files?
From the Govish/stepUP-Electronics-2-0 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Extruder breakout design in my own project?
The repository has no license, so all rights stay with Govish. Use it as a reference, and ask the author before reusing the design.
More boards in stepUP-Electronics-2-0
ESP32
Quickstep controller RevII
Govish
192.5 × 165 mm235 parts2LNo license0ESP32
Quickstep controller
Govish
192.5 × 165 mm235 parts2LNo license0StepUP lcd
Govish
180 × 90 mm27 parts2LNo license0Heatbed breakout
Govish
85 × 28 mm5 parts2LNo license0RGB endstop breakout
Govish
40 × 35 mm4 parts2LNo license0USB Adapter
Govish
17.8 × 10.2 mm4 parts2LNo license0Gantry x motor breakout
Govish
85.8 × 84.3 mm3 parts2LNo license0Y z motor endstop breakout
Govish
29 × 35 mm3 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k