Heatbed breakout
Govish·stepUP-Electronics-2-0·adapter_boards/heatbed_breakout/heatbed_breakout.kicad_pcb
About the Heatbed breakout
Heatbed breakout is an open source PCB design by Govish, published on GitHub. It is a 2-layer board measuring 85 × 28 mm, with 5 components from 5 distinct parts.
By type, the board carries 3 connectors, 1 diode and 1 resistor.
It belongs with the dev boards & breakouts and robotics & motion designs in this gallery.
Heatbed breakout bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x13_Odd_Even | IDC-Header_2x13_P2.54mm_Vertical | J1 |
| 1 | Conn_XT | XT60-Female | J2 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 2K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
Heatbed breakout design files
The KiCad project lives in the Govish/stepUP-Electronics-2-0 repository on GitHub; these links point at the commit this page was built from.
Heatbed breakout: common questions
How big is the Heatbed breakout?
The Heatbed breakout measures 85 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Heatbed breakout?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Heatbed breakout design files?
From the Govish/stepUP-Electronics-2-0 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Heatbed breakout design in my own project?
The repository has no license, so all rights stay with Govish. Use it as a reference, and ask the author before reusing the design.
More boards in stepUP-Electronics-2-0
ESP32
Quickstep controller RevII
Govish
192.5 × 165 mm235 parts2LNo license0ESP32
Quickstep controller
Govish
192.5 × 165 mm235 parts2LNo license0StepUP lcd
Govish
180 × 90 mm27 parts2LNo license0Extruder breakout
Govish
29 × 50 mm13 parts2LNo license0RGB endstop breakout
Govish
40 × 35 mm4 parts2LNo license0USB Adapter
Govish
17.8 × 10.2 mm4 parts2LNo license0Gantry x motor breakout
Govish
85.8 × 84.3 mm3 parts2LNo license0Y z motor endstop breakout
Govish
29 × 35 mm3 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k