Quickstep controller RevII
Govish·stepUP-Electronics-2-0·quickstep_controller/quickstep_controller RevII/quickstep_controller RevII.kicad_pcb
About the Quickstep controller RevII PCB
Quickstep controller RevII is an open source ESP32 PCB design by Govish, published on GitHub. It is a 2-layer board measuring 192.5 × 165 mm, with 235 components from 51 distinct parts.
Its main chip is the ESP-32_DEVBOARD, from the ESP32 family. Other key parts include the TS3A27518E, SN74LVC1G3157DCK3, LTV-817S, 74HC14 and PCA9306. By type, the board carries 93 resistors, 58 diodes, 36 capacitors, 19 ICs, 13 connectors and 12 transistors.
It belongs with the robotics & motion and iot & wireless designs in this gallery.
Main components on the Quickstep controller RevII
Quickstep controller RevII bill of materials (BOM)
235 components, 51 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS3A27518E | TSSOP-24_4.4x7.8mm_P0.65mm | U201 |
| 1 | SN74LVC1G3157DCK3 | SOT-363_SC-70-6 | U202 |
| 3 | LTV-817S | SMDIP-4_W9.53mm | U301, U302, U708 |
| 1 | 74HC14 | TSSOP-14_4.4x5mm_P0.65mm | U401 |
| 1 | PCA9306 | SSOP-8_2.95x2.8mm_P0.65mm | U501 |
| 1 | P82B715 | SOIC-8_3.9x4.9mm_P1.27mm | U502 |
| 1 | 24LC256 | TSSOP-8_4.4x3mm_P0.65mm | U503 |
| 1 | ESP-32_DEVBOARD | ESP32 | U601 |
| 4 | StepStick-TMC2130 | TMC-21x0 | U701, U702, U703, U704 |
| 1 | 4066 | SSOP-14_5.3x6.2mm_P0.65mm | U705 |
| 2 | 74HC245 | SSOP-20_5.3x7.2mm_P0.65mm | U706, U707 |
| 1 | LM3488 | VSSOP-8_3.0x3.0mm_P0.65mm | U801 |
| 1 | LM393 | MSOP-8_3x3mm_P0.65mm | U802 |
| 4 | AOD514 | TO-252-2 | Q301, Q302, Q304, Q802 |
| 8 | NTR3C21NZT1G | SOT-23_Handsoldering | Q303, Q401, Q402, Q501, Q502, Q503, Q701, Q801 |
| 2 | Conn_01x04 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J101, J1502 |
| 1 | SD_Card | SD_TE_2041021 | J201 |
| 1 | USB_A | USB_Adapter | J601 |
| 1 | USB_B | CUI_UJ2-BH-W1-TH | J602 |
| 3 | Conn_02x03_Odd_Even | IDC-Header_2x03_P2.54mm_Vertical | J901, J1001, J1301 |
Show 31 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_02x13_Odd_Even | IDC-Header_2x13_P2.54mm_Vertical | J1101 |
| 1 | Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J1201 |
| 1 | Conn_02x10_Odd_Even | IDC-Header_2x10_P2.54mm_Vertical | J1401 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1501 |
| 1 | Conn_XT | XT60-Male | J1503 |
| 1 | 7.5A | Keystone_3557 | F1501 |
| 1 | 25A | Keystone_3557 | F1502 |
| 1 | Arduino_Due_Shield | Arduino_Due_Shield_noHolesSilk | XA601 |
| 12 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D201, D202, D301, D302, D405, D406, D407, D408 +4 |
| 11 | 3.6V | D_SOD-323_HandSoldering | D303, D304, D401, D402, D403, D404, D411, D412 +3 |
| 1 | 150505M173300 | LED_RGB_5050-6 | D501 |
| 33 | DSS15UTR | D_SOD-123F | D701, D901, D902, D903, D904, D905, D906, D907 +25 |
| 1 | CDBC380-G | D_SMC_Handsoldering | D801 |
| 1 | 4.7uH | L_Bourns_SRR1260 | L801 |
| 21 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C201, C202, C203, C401, C402, C403, C404, C405 +13 |
| 6 | 4u7 | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C301, C302, C701, C703, C705, C707 |
| 6 | 470u | CP_Radial_D12.5mm_P5.00mm | C702, C704, C706, C708, C802, C810 |
| 1 | 270p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C805 |
| 1 | 4.7n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C806 |
| 1 | 10p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C808 |
| 24 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R201, R202, R301, R302, R409, R410, R411, R412 +16 |
| 33 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R203, R204, R205, R206, R207, R208, R209, R401 +25 |
| 10 | 390 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R303, R311, R312, R506, R507, R508, R509, R510 +2 |
| 2 | 390R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R304, R306 |
| 9 | 240K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R305, R307, R308, R415, R416, R503, R511, R512 +1 |
| 8 | 4K7 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R309, R310, R313, R314, R501, R502, R504, R505 |
| 3 | 16.9K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R801, R806, R812 |
| 1 | 4.7K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R802 |
| 1 | 100R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R813 |
| 1 | 7mR | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R814 |
| 1 | 22.6K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R815 |
Quickstep controller RevII design files
The KiCad project lives in the Govish/stepUP-Electronics-2-0 repository on GitHub; these links point at the commit this page was built from.
Quickstep controller RevII: common questions
What microcontroller does the Quickstep controller RevII use?
The Quickstep controller RevII is built around the ESP-32_DEVBOARD, from the ESP32 family.
How big is the Quickstep controller RevII PCB?
The Quickstep controller RevII measures 192.5 × 165 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Quickstep controller RevII?
235 components, from 51 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Quickstep controller RevII design files?
From the Govish/stepUP-Electronics-2-0 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Quickstep controller RevII design in my own project?
The repository has no license, so all rights stay with Govish. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Quickstep controller RevII without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in stepUP-Electronics-2-0
ESP32
Quickstep controller
Govish
192.5 × 165 mm235 parts2LNo license0StepUP lcd
Govish
180 × 90 mm27 parts2LNo license0Extruder breakout
Govish
29 × 50 mm13 parts2LNo license0Heatbed breakout
Govish
85 × 28 mm5 parts2LNo license0RGB endstop breakout
Govish
40 × 35 mm4 parts2LNo license0USB Adapter
Govish
17.8 × 10.2 mm4 parts2LNo license0Gantry x motor breakout
Govish
85.8 × 84.3 mm3 parts2LNo license0Y z motor endstop breakout
Govish
29 × 35 mm3 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k