HardLabs

Kubisat sensors

gredzikk·kubisat·hardware/kubisat_sensor/kubisat_sensors/kubisat_sensors.kicad_pcb

Kubisat sensors PCB layout, top view — open source board by gredzikk

About the Kubisat sensors PCB

Kubisat sensors is an open source PCB design by gredzikk, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 80 mm, with 10 components from 8 distinct parts.

By type, the board carries 7 connectors, 2 capacitors and 1 IC.

It belongs with the sensors, rf & radio and science & space designs in this gallery.

From the project

Hardware and software of cubesat model for engineering thesis

Welcome to the KubiSat project! This repository contains all the necessary files to build your own small satellite based on the Raspberry Pi Pico, along with the corresponding ground station firmware. This project was originally conceived as an engineering thesis and has been open-sourced to be useful to a wider community.

The repository is organized into several key directories:

Kubisat sensors bill of materials (BOM)

10 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
USB_C_RECEPTACLE_POWERONLY_6P
POWER
J1
1
B2B-PH-SM4-TB_LF__SN_
I2C1
J2
1
CONN_01X06_MOUNTINGPIN
Conn_01x08
J3
3
Conn_01x08
J4, J5, J8
1
SPI0
J7
1
10u
C1
1
10U
10u
C2

Kubisat sensors design files

The KiCad project lives in the gredzikk/kubisat repository on GitHub; these links point at the commit this page was built from.

Kubisat sensors: common questions

How big is the Kubisat sensors PCB?

The Kubisat sensors measures 80 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kubisat sensors?

10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kubisat sensors design files?

From the gredzikk/kubisat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kubisat sensors design in my own project?

Yes, under the terms of its MIT license, which gredzikk chose for the repository.

More boards in kubisat

Similar boards