IM350 AM550 multi
About the IM350 AM550 multi PCB
IM350 AM550 multi is an open source ESP8266 PCB design by greenMikeEU, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 99 × 84 mm, with 19 components from 17 distinct parts.
Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the MCP1700-3302E_SOT23. By type, the board carries 6 connectors, 6 resistors, 2 ICs, 1 battery holder, 1 switch and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
SHRDZM (just a name, not an acronym) is an ESP8285/ESP8266 based sensor and actor integration platform.
To build cheap integrations of many kind of sensors and/or actors into your own automation solution with the focus on energy efficiancy (battery operated devices) and simpleness.
Main components on the IM350 AM550 multi
IM350 AM550 multi bill of materials (BOM)
19 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1700-3302E_SOT23 | SOT-23_Handsoldering | U1 |
| 1 | ESP-12F | ESP-12E | U2 |
| 1 | 3.3V | Pin_D1.3mm_L11.0mm_LooseFit | J1 |
| 1 | TX | Pin_D1.3mm_L11.0mm_LooseFit | J2 |
| 1 | RX | Pin_D1.3mm_L11.0mm_LooseFit | J3 |
| 1 | GPIO0 | Pin_D1.3mm_L11.0mm_LooseFit | J4 |
| 1 | GND | Pin_D1.3mm_L11.0mm_LooseFit | J6 |
| 1 | RJ12 | RJ12_Amphenol_54601 | J7 |
| 1 | Battery_Cell | BatteryHolder_MPD_BH-18650-PC2_NoHole | BT1 |
| 1 | LOGO | SHRDZM 12x4 | G1 |
| 1 | LOGO | SHRDZM Symbol 5x5 | G2 |
| 1 | Pairing | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 330k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 0R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R6 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
IM350 AM550 multi design files
The KiCad project lives in the greenMikeEU/shrdzm repository on GitHub; these links point at the commit this page was built from.
IM350 AM550 multi: common questions
What microcontroller does the IM350 AM550 multi use?
The IM350 AM550 multi is built around the ESP-12F, from the ESP8266 family.
How big is the IM350 AM550 multi PCB?
The IM350 AM550 multi measures 99 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IM350 AM550 multi?
19 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the IM350 AM550 multi design files?
From the greenMikeEU/shrdzm repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IM350 AM550 multi design in my own project?
Yes, under the terms of its GPL-3.0 license, which greenMikeEU chose for the repository.
Can I test firmware for the IM350 AM550 multi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in shrdzm
ESP8266IM350 AM550 T210 5V V5.0 multi
50 × 20 mm33 parts2LGPL-3.00
ESP8266IM350 AM550 T210 5V V5.0
100 × 100 mm33 parts2LGPL-3.00
MBus USB 12
74 × 41 mm23 parts2LGPL-3.00
ESP8266IM350 AM550
78 × 21 mm19 parts2LGPL-3.00
ESP8266IM350 AM550 5V V3.0 multi
99 × 100 mm14 parts2LGPL-3.00
ESP8266DOORSENSOR Simple 9V single
37.5 × 15.8 mm14 parts2LGPL-3.00
ESP8266DOORSENSOR Simple 9V
100 × 100 mm14 parts2LGPL-3.00
ESP8266IM350 AM550 5V V4.0 multi
100 × 100 mm14 parts2LGPL-3.00
ESP8266IM350 AM550 5V V4.0
50 × 20 mm14 parts2LGPL-3.00
ESP8266IM350 AM550 5V V2.0 Multi
84 × 95 mm12 parts2LGPL-3.00
ESP8266IM350 AM550 5V multi
100 × 100 mm12 parts2LGPL-3.00
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398