XDS110 onboard prog breakout
About the XDS110 onboard prog breakout
XDS110 onboard prog breakout is an open source PCB design by Gregification, published on GitHub under the MIT license. It is a 2-layer board measuring 57.5 × 38.3 mm, with 16 components from 4 distinct parts.
By type, the board carries 8 diodes, 6 transistors and 2 resistors.
It belongs with the power & battery and dev boards & breakouts designs in this gallery.
From the project
Battery Management System
BMS for University Of Texas At Arlington's FSAE Race team's E27 vehicle. > point of contact for this repo is George Boone
XDS110 onboard prog breakout bill of materials (BOM)
16 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 2N7002 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 8 | LED | LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | 200 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 700 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
XDS110 onboard prog breakout design files
The KiCad project lives in the Gregification/BeeMS repository on GitHub; these links point at the commit this page was built from.
XDS110 onboard prog breakout: common questions
How big is the XDS110 onboard prog breakout?
The XDS110 onboard prog breakout measures 57.5 × 38.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XDS110 onboard prog breakout?
16 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the XDS110 onboard prog breakout design files?
From the Gregification/BeeMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XDS110 onboard prog breakout design in my own project?
Yes, under the terms of its MIT license, which Gregification chose for the repository.
More boards in BeeMS
MasterBoard A
60 × 100 mm163 parts2LMIT5
Mini Orion TEM
319.7 × 58.4 mm158 parts2LMIT5
VoltageTap Bee
50 × 110.1 mm151 parts2LMIT5
VoltageTap A
50 × 105 mm141 parts2LMIT5
EVAL MSPM0lG3507 BQ76952
78.7 × 81.8 mm102 parts2LMIT5
CANE Junction
60 × 60 mm91 parts2LMIT5
LV Sensor
186.7 × 123.9 mm68 parts2LMIT5
CAN Eth Bridge
22.6 × 60.7 mm57 parts2LMIT5
W5500 testing
34.4 × 55.3 mm42 parts2LMIT5
HC ohm tester
27.1 × 48.3 mm24 parts2LMIT5
Interface board
394.2 × 72.6 mm15 parts2LMIT5
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k