CANE Junction
About the CANE Junction PCB
CANE Junction is an open source PCB design by Gregification, published on GitHub under the MIT license. It is a 2-layer board measuring 60 × 60 mm, with 91 components from 41 distinct parts.
Other key parts include the PAM8904QJER, MX25L3233FM2, XMSPM0G3519SPMR, AP64060ZQ and ISO1044BD. By type, the board carries 38 capacitors, 19 resistors, 14 ICs, 5 connectors, 5 diodes and 3 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Battery Management System
BMS for University Of Texas At Arlington's FSAE Race team's E27 vehicle. > point of contact for this repo is George Boone
Main components on the CANE Junction
CANE Junction bill of materials (BOM)
91 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM8904QJER | QFN50P300X300X65-17N-D | IC1 |
| 1 | MX25L3233FM2 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | XMSPM0G3519SPMR | LQFP64_PM_TEX-M | U2 |
| 2 | AP64060ZQ | TSOT-23-6 | U101, U201 |
| 2 | ISO1044BD | SOIC-8_5.3x6.2mm_P1.27mm | U103, U202 |
| 2 | ISOM8600 | SOIC4_DFG_TEX-M | U104, U203 |
| 2 | PUCC33420QRAQRQ1 | VSON-FCRLF12_RAQ_TEX | U105, U204 |
| 2 | NCP163ASN330T1G | SOT-23-5_HandSoldering | U106, U205 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U301 |
| 1 | Crystal_GND24 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y301 |
| 1 | programming | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | UART | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 2 | glv | Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J101, J201 |
| 1 | RJ45_Amphenol_RJMG1BD3B8K1ANR | RJ45_Amphenol_RJMG1BD3B8K1ANR | J301 |
| 1 | Buzzer | MagneticBuzzer_ProSignal_ABI-009-RC | BZ1 |
| 2 | ESD2CAN36DBZRQ1 | TSOT-23_HandSoldering | CR101, CR201 |
| 2 | Choke_CommonMode_FerriteCore_1243 | L_CommonMode_Wurth_WE-CNSW-1206 | FL101, FL201 |
| 1 | SW_Push | wurth elektronik 4.7x3.5mm side push button | SW101 |
| 2 | ES1D | D_SMA | D101, D201 |
| 1 | blue | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D102 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TS4148 | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D103, D202 |
| 1 | MH1608-151Y | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB301 |
| 2 | 10u | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L101, L201 |
| 8 | 470n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C11, C101, C102, C201, C202 |
| 9 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C104, C105, C106, C204, C205, C206 +1 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9, C10 |
| 10 | 220n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C103, C107, C110, C203, C301, C304, C305, C311 +2 |
| 2 | 18p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C303, C306 |
| 2 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C312, C319 |
| 1 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C314 |
| 2 | 6.8n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C316, C317 |
| 1 | 22n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C318 |
| 2 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | 121 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101, R201 |
| 4 | 750 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R102, R202, R316, R317 |
| 1 | 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R103 |
| 1 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R301 |
| 2 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R302, R315 |
| 1 | 12.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R303 |
| 4 | 49.9 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R309, R310, R313, R314 |
| 2 | 20k | R_array_EXB2HV_8 | RN101, RN201 |
CANE Junction design files
The KiCad project lives in the Gregification/BeeMS repository on GitHub; these links point at the commit this page was built from.
CANE Junction: common questions
How big is the CANE Junction PCB?
The CANE Junction measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CANE Junction?
91 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the CANE Junction design files?
From the Gregification/BeeMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CANE Junction design in my own project?
Yes, under the terms of its MIT license, which Gregification chose for the repository.
More boards in BeeMS
MasterBoard A
60 × 100 mm163 parts2LMIT5
Mini Orion TEM
319.7 × 58.4 mm158 parts2LMIT5
VoltageTap Bee
50 × 110.1 mm151 parts2LMIT5
VoltageTap A
50 × 105 mm141 parts2LMIT5
EVAL MSPM0lG3507 BQ76952
78.7 × 81.8 mm102 parts2LMIT5
LV Sensor
186.7 × 123.9 mm68 parts2LMIT5
CAN Eth Bridge
22.6 × 60.7 mm57 parts2LMIT5
W5500 testing
34.4 × 55.3 mm42 parts2LMIT5
HC ohm tester
27.1 × 48.3 mm24 parts2LMIT5
XDS110 onboard prog breakout
57.5 × 38.3 mm16 parts2LMIT5
Interface board
394.2 × 72.6 mm15 parts2LMIT5
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k