CAN Eth Bridge
About the CAN Eth Bridge PCB
CAN Eth Bridge is an open source PCB design by Gregification, published on GitHub under the MIT license. It is a 2-layer board measuring 22.6 × 60.7 mm, with 57 components from 33 distinct parts.
Other key parts include the TPSM33606S5QRDNRQ1, TPS26625DRCR, MCP2542FDxMF, XMSM0G3507SDGS28R and NCP163ASN330T1G. By type, the board carries 21 capacitors, 20 resistors, 6 ICs, 3 connectors, 2 transistors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Battery Management System
BMS for University Of Texas At Arlington's FSAE Race team's E27 vehicle. > point of contact for this repo is George Boone
Main components on the CAN Eth Bridge
CAN Eth Bridge bill of materials (BOM)
57 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPSM33606S5QRDNRQ1 | RDN0011A_TEX | U101 |
| 1 | TPS26625DRCR | DRC0010J_NV | U102 |
| 1 | MCP2542FDxMF | SOIC-8_3.9x4.9mm_P1.27mm | U103 |
| 1 | XMSM0G3507SDGS28R | VSSOP28_DGS_TEX-M | U104 |
| 1 | NCP163ASN330T1G | SOT-23-5_HandSoldering | U106 |
| 1 | W5500 | LQFP-48_7x7mm_P0.5mm | U301 |
| 2 | MMBT5550L | SOT-23 | Q301, Q302 |
| 1 | Crystal_GND24 | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y301 |
| 1 | Global LV and CAN | Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J101 |
| 1 | Conn_01x05_Pin | PinHeader_1x05_P2.54mm_Vertical | J102 |
| 1 | RJ45_Amphenol_RJMG1BD3B8K1ANR | RJ45_Amphenol_RJMG1BD3B8K1ANR | J301 |
| 1 | Choke_CommonMode_FerriteCore_1243 | L_CommonModeChoke_Coilcraft_1812CAN | FL101 |
| 1 | green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D102 |
| 1 | blue | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D105 |
| 1 | MH1608-151Y | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB301 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101 |
| 3 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C102, C312, C319 |
| 4 | 22u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C103, C105, C302, C309 |
| 7 | 220n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C106, C110, C301, C304, C305, C311, C313 |
| 2 | 18p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C303, C306 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C314 |
| 2 | 6.8n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C316, C317 |
| 1 | 22n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C318 |
| 1 | 22.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R101 |
| 5 | 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R102, R103, R104, R311, R312 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R105 |
| 1 | 40.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R106 |
| 2 | 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R107, R301 |
| 1 | 33.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R108 |
| 2 | 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R302, R315 |
| 1 | 12.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R303 |
| 4 | 49.9 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R309, R310, R313, R314 |
| 2 | 750 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R316, R317 |
CAN Eth Bridge design files
The KiCad project lives in the Gregification/BeeMS repository on GitHub; these links point at the commit this page was built from.
CAN Eth Bridge: common questions
How big is the CAN Eth Bridge PCB?
The CAN Eth Bridge measures 22.6 × 60.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CAN Eth Bridge?
57 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the CAN Eth Bridge design files?
From the Gregification/BeeMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CAN Eth Bridge design in my own project?
Yes, under the terms of its MIT license, which Gregification chose for the repository.
More boards in BeeMS
MasterBoard A
60 × 100 mm163 parts2LMIT5
Mini Orion TEM
319.7 × 58.4 mm158 parts2LMIT5
VoltageTap Bee
50 × 110.1 mm151 parts2LMIT5
VoltageTap A
50 × 105 mm141 parts2LMIT5
EVAL MSPM0lG3507 BQ76952
78.7 × 81.8 mm102 parts2LMIT5
CANE Junction
60 × 60 mm91 parts2LMIT5
LV Sensor
186.7 × 123.9 mm68 parts2LMIT5
W5500 testing
34.4 × 55.3 mm42 parts2LMIT5
HC ohm tester
27.1 × 48.3 mm24 parts2LMIT5
XDS110 onboard prog breakout
57.5 × 38.3 mm16 parts2LMIT5
Interface board
394.2 × 72.6 mm15 parts2LMIT5
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k