A2000-x86-bridgeboard
GregWinfield·a2000-x86-bridgeboard·hardware/kicad/sheets/01_zorro_interface.kicad_sch
About the A2000-x86-bridgeboard PCB
A2000-x86-bridgeboard is an open source PCB design by GregWinfield, published on GitHub under the Custom license license. It is a board, with 56 components from 18 distinct parts.
Other key parts include the SN74LVC16244ADGGR, SN74LVCH16T245DGGR, SN74LVC8T245PWR, SN74LVC07APWR and SN74LVC1G00DBVR. By type, the board carries 23 resistors, 22 capacitors, 9 ICs, 1 connector and 1 jumper.
It belongs with the retro computing designs in this gallery.
From the project
Open-source Zorro II bridgeboard for the Amiga 2000 carrying a removable x86 SBC (Radxa X4, Intel N100). Stage 1: architecture review.
An open-source, modern successor to the Commodore A2386SX bridgeboard. It is a genuine Zorro II card for the Amiga 2000 that carries a removable x86 single-board computer (Rev 1: Radxa X4, Intel N100). The two systems share memory, mailboxes and interrupts through an FPGA bridge.
Nothing in this repository is electrically, timing- or mechanically validated. ERC results and netlist audits are reported, but they are not validation. Before any powered hardware is installed in an A2000, gate G-PSU applies (PSU measurement record).
Main components on the A2000-x86-bridgeboard
A2000-x86-bridgeboard bill of materials (BOM)
56 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LVC16244ADGGR Texas Instruments | TSSOP-48_6.1x12.5mm_P0.5mm | U101, U102 |
| 1 | SN74LVCH16T245DGGR Texas Instruments | TSSOP-48_6.1x12.5mm_P0.5mm | U103 |
| 1 | SN74LVC8T245PWR Texas Instruments | TSSOP-24_4.4x7.8mm_P0.65mm | U104 |
| 1 | SN74LVC07APWR Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U105 |
| 1 | SN74LVC1G00DBVR Texas Instruments | SOT-23-5 | U106 |
| 1 | SN74LVC32APWR Texas Instruments | TSSOP-14_4.4x5mm_P0.65mm | U107 |
| 1 | TPS3808G33DBVR Texas Instruments | SOT-23-6 | U108 |
| 1 | TPS3808G01DBVR Texas Instruments | SOT-23-6 | U109 |
| 1 | n/a Zorro II edge (100) n/a (PCB gold fingers) | Zorro2_Edge_2x50_P2.54mm | J101 |
| 1 | DISABLE | PinHeader_1x02_P2.54mm_Vertical | JP101 |
| 20 | 100n | C_0603_1608Metric | C101, C102, C103, C104, C105, C106, C107, C108 +12 |
| 2 | 10u | C_0805_2012Metric | C116, C117 |
| 8 | 2.2k | R_0603_1608Metric | R101, R102, R103, R104, R105, R106, R107, R108 |
| 6 | 10k | R_0603_1608Metric | R109, R121, R122, R123, R124, R126 |
| 2 | 22R | R_0603_1608Metric | R117, R118 |
| 2 | 0R DNP | R_0603_1608Metric | R119, R120 |
| 1 | 95.3k | R_0603_1608Metric | R125 |
| 4 | YC164-JR-0722RL (TBV) 4x22R Yageo | R_Array_Convex_4x0603 | RN101, RN102, RN103, RN104 |
A2000-x86-bridgeboard design files
The KiCad project lives in the GregWinfield/a2000-x86-bridgeboard repository on GitHub; these links point at the commit this page was built from.
A2000-x86-bridgeboard: common questions
How many components are on the A2000-x86-bridgeboard?
56 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the A2000-x86-bridgeboard design files?
From the GregWinfield/a2000-x86-bridgeboard repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the A2000-x86-bridgeboard design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k