10 open source boards using the SN74LVC1G00DBVR

Real designs built with the SN74LVC1G00DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the SN74LVC1G00DBVR

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74LVC1G00DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF).
GNDpin 3Connected to: GND 100%
VCCpin 5Connected to: 3.3V 86%
  • Decoupling capacitor on 57% · 100 nF (10), 1 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TS VDAC A4 by andrewinsidelazarev, Masters thesis lora gateway compute module cubesat payload pcb by dpmj, Tangnano9k kr260-hat by calperxd and T20260928 PCB TEST by jamyang838.

The SN74LVC1G00DBVR in open source designs

The gallery holds 10 open source boards using the SN74LVC1G00DBVR from 7 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 265 components.

90% use four copper layers or more, and 70% carry an open source license.

The most starred is Masters thesis lora gateway compute module cubesat payload pcb by dpmj.

Microcontrollers on boards using the SN74LVC1G00DBVR

SN74LVC1G00DBVR: common questions

Where can I find a SN74LVC1G00DBVR reference design?

Each of the 10 boards on this page is a real design using the SN74LVC1G00DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G00DBVR VCC pin?

The VCC pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G00DBVR.

What parts are used alongside the SN74LVC1G00DBVR?

The SN74LVC1G08DBVR, SN74LVC1G17DBVR, SN74LVC1G97DBVR, TLV9061IDBVR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G00DBVR use?

Most are built on ESP32 (6), FPGA (1), PIC (1) and Raspberry Pi (1).

How big is a typical board using the SN74LVC1G00DBVR?

The median is 100 × 80 mm, and 10% are two-layer designs.

What is the most popular open source board using the SN74LVC1G00DBVR?

By GitHub stars, Masters thesis lora gateway compute module cubesat payload pcb by dpmj, with 2 stars.

Can I simulate one of these boards using the SN74LVC1G00DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part