Cool
gryphprime·coolschematic
About the Cool PCB
Cool is an open source ESP32 PCB design by gryphprime, published on GitHub under the MIT license. It is a 2-layer board measuring 106.7 × 76.2 mm, with 11 components from 7 distinct parts.
Its main chip is the ESP32_NODEMCU, from the ESP32 family. Other key parts include the MIC29310-3.3WU and INA219AxD. By type, the board carries 6 connectors, 3 ICs and 2 diodes.
From the project
This repository provides a ready-to-go CI/CD workflow for KiCad 5 with GitHub actions.
This repository provides a ready-to-go CI/CD workflow for KiCad 5 with GitHub actions.
1. Integration with GitHub releases to automatically produce documentation and fabrication files on every GitHub release, including automatic date and version stamping of schematics and PCBs. 2. KiBot preflighting on every pull request (ERC/DRC checks disabled by default). 3. VSCode dev container and default build task for easy local testing of KiBot scripts.

Main components on the Cool
Cool bill of materials (BOM)
11 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC29310-3.3WU | MIC29310-3.3WU | U2 |
| 1 | INA219AxD | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | ESP32_NODEMCU | MODULE_ESP32_NODEMCU | U4 |
| 4 | 1706730 | TerminalBlock_WAGO_236-101_1x01_P5.00mm_45Degree | J1, J2, J3, J5 |
| 2 | 1935187 | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J4, J7 |
| 1 | MLEGRN-A1-0000-000X01 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | MLBAWT-A1-0000-000W51 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
Cool design files
The KiCad project lives in the gryphprime/coolschematic repository on GitHub; these links point at the commit this page was built from.
- Layoutcoolschematic.kicad_pcb
- Schematiccoolschematic.kicad_sch
Cool: common questions
What microcontroller does the Cool use?
The Cool is built around the ESP32_NODEMCU, from the ESP32 family.
How big is the Cool PCB?
The Cool measures 106.7 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cool?
11 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cool design files?
From the gryphprime/coolschematic repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cool design in my own project?
Yes, under the terms of its MIT license, which gryphprime chose for the repository.
Can I test firmware for the Cool without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k