Ggsmdriver
gustavgaston·ggsmdriver·kicad/ggsmdriver.kicad_pcb
About the Ggsmdriver PCB
Ggsmdriver is an open source STM32 PCB design by gustavgaston, published on GitHub. It is a 4-layer board measuring 55 × 45 mm, with 59 components from 42 distinct parts.
Its main chip is the STM32G0B1CBT6, from the STM32 family. Other key parts include the TMC2209-LA, TPS54202DDCR, XC6206P332MR and USBLC6-2SC6. By type, the board carries 23 capacitors, 16 resistors, 6 diodes, 5 ICs, 5 connectors and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
A small, reusable stepper driver module: STM32G0B1 + TMC2209, one 9–24 V supply (barrel jack or 2-pole terminal), USB-C for serial and firmware upload, and a 4-pole terminal for a 4-wire motor. The board is 4 layers, 55×45 mm, with every part on top, for JLCPCB assembly.
A small, reusable stepper driver module: STM32G0B1 + TMC2209, one 9–24 V supply (barrel jack or 2-pole terminal), USB-C for serial and firmware upload, and a 4-pole terminal for a 4-wire motor. The board is 4 layers, 55×45 mm, with every part on top, for JLCPCB assembly.
The KiCad files are generated by autopcb from hardware/ggsmdriver.py; hand edits in KiCad are lost on regeneration. They are KiCad 7 format and open in KiCad 10.
Main components on the Ggsmdriver
Ggsmdriver bill of materials (BOM)
59 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G0B1CBT6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TMC2209-LA | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | TPS54202DDCR | TSOT-23-6 | U3 |
| 1 | XC6206P332MR | SOT-23 | U4 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | DC-005 | BarrelJack_Horizontal | J1 |
| 1 | C474892 VIN 9-24V | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 1 | C42400616 MOTOR A1 A2 B1 B2 | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J3 |
| 1 | C492406 EXP | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | C165948 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | C36376 10k current | Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | C318884 BOOT | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 1 | C318884 RESET | SW_Push_1P1T_XKB_TS-1187A | SW2 |
| 1 | SS14 | D_SMA | D1 |
| 1 | C12624 PWR green | LED_0603_1608Metric | D2 |
| 1 | C72041 STATUS blue | LED_0603_1608Metric | D3 |
| 1 | C2287 STEP yellow | LED_0603_1608Metric | D4 |
| 1 | C2286 DIR red | LED_0603_1608Metric | D5 |
| 1 | C12624 DIR green | LED_0603_1608Metric | D6 |
| 1 | 15UH 15uH | L_Bourns_SRN6045TA | L1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C13585 10uF 50V | C_1206_3216Metric | C1 |
| 1 | C14663 100nF 50V | C_0603_1608Metric | C2 |
| 5 | 100NF 100nF | C_0603_1608Metric | C3, C11, C13, C14, C15 |
| 1 | 75PF 75pF | C_0603_1608Metric | C4 |
| 2 | C12891 22uF 25V | C_1206_3216Metric | C5, C6 |
| 1 | 10NF 10nF | C_0603_1608Metric | C7 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C8, C12 |
| 2 | 1UF 1uF | C_0603_1608Metric | C9, C10 |
| 1 | C77571 22nF 50V | C_0603_1608Metric | C16 |
| 3 | C64705 220nF 50V | C_0603_1608Metric | C17, C18, C19 |
| 1 | C242075 22uF 50V | CP_Elec_6.3x5.9 | C20 |
| 2 | 10UF 10uF | C_0805_2012Metric | C21, C22 |
| 1 | 220NF 220nF | C_0603_1608Metric | C23 |
| 1 | 100K 100k | R_0603_1608Metric | R1 |
| 1 | 13K 13k | R_0603_1608Metric | R2 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 1M | R_0603_1608Metric | R5 |
| 3 | 1k | R_0603_1608Metric | R6, R8, R13 |
| 2 | 10K 10k | R_0603_1608Metric | R7, R12 |
| 2 | C5185600 0.05R 1W | R_1206_3216Metric | R9, R10 |
| 1 | 33K 33k | R_0603_1608Metric | R11 |
| 3 | 20K 20k | R_0603_1608Metric | R14, R15, R16 |
Ggsmdriver design files
The KiCad project lives in the gustavgaston/ggsmdriver repository on GitHub; these links point at the commit this page was built from.
Ggsmdriver: common questions
What microcontroller does the Ggsmdriver use?
The Ggsmdriver is built around the STM32G0B1CBT6, from the STM32 family.
How big is the Ggsmdriver PCB?
The Ggsmdriver measures 55 × 45 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Ggsmdriver?
59 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ggsmdriver design files?
From the gustavgaston/ggsmdriver repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ggsmdriver design in my own project?
The repository has no license, so all rights stay with gustavgaston. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Ggsmdriver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k