ArScanner

GustavoGuseMartins·ArScanner

This repository ships a schematic but no board layout.

About the ArScanner PCB

ArScanner is an open source ESP32 PCB design by GustavoGuseMartins, published on GitHub. It is a board, with 25 components from 18 distinct parts.

Its main chip is the ESP32-S3-DEVKITC-1-N16R8V, from the ESP32 family. Other key parts include the TMC2209 SILENTSTEPSTICK and MLX90640ESF-BAA-000-TU. By type, the board carries 6 connectors, 4 capacitors, 4 resistors, 2 ICs, 2 modules and 1 transistor.

It belongs with the robotics & motion designs in this gallery.

From the project

Documento central do projeto, atualizado em 04/10/2026. Reúne o funcionamento atual, a intenção das funções, a organização do código, as dificuldades de desenvolvimento e os critérios para concluir o trabalho. Os relatórios anteriores em docs/ são registros datados: uma configura

Documento central do projeto, atualizado em 04/10/2026. Reúne o funcionamento atual, a intenção das funções, a organização do código, as dificuldades de desenvolvimento e os critérios para concluir o trabalho. Os relatórios anteriores em docs/ são registros datados: uma configuração ou pendência descrita neles pode ter sido substituída depois.

O projeto propõe um scanner tridimensional com LiDAR e câmera térmica, conectado a um visualizador Android em realidade aumentada. A intenção é medir a geometria de um ambiente, associar temperaturas às superfícies observadas e apresentar a nuvem no…

Main components on the ArScanner

ArScanner bill of materials (BOM)

25 components, 18 distinct parts.

QtyPartRefs
1
ESP32-S3-DEVKITC-1-N16R8V
U1
1
TMC2209 SILENTSTEPSTICK
TMC2209_SILENTSTEPSTICK
U3
1
MLX90640ESF-BAA-000-TU
A1
1
Stepper_Motor_bipolar
M1
1
IRLZ44N
Q1
2
Conn_01x05_Pin
J1, J2
1
Conn_01x06_Pin
J3
2
Conn_01x04_Pin
J4, J5
1
Conn_01x08_Pin
J6
1
DWM1000
DWM1
4
MountingHole_Pad
H1, H2, H3, H4
1
1N4007
D1
1
C_Polarized
C1
2
100nF
C2, C4
1
10uF
C3
1
1k
R1
2
4,7k
R2, R4
1
10k
R3

ArScanner design files

The KiCad project lives in the GustavoGuseMartins/ArScanner repository on GitHub; these links point at the commit this page was built from.

ArScanner: common questions

What microcontroller does the ArScanner use?

The ArScanner is built around the ESP32-S3-DEVKITC-1-N16R8V, from the ESP32 family.

How many components are on the ArScanner?

25 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArScanner design files?

From the GustavoGuseMartins/ArScanner repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the ArScanner design in my own project?

The repository has no license, so all rights stay with GustavoGuseMartins. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArScanner without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards