Aniweather
About the Aniweather PCB
Aniweather is an open source PCB design by hackclub, published on GitHub under the MIT license. It is a 2-layer board measuring 55 × 75 mm, with 31 components from 19 distinct parts.
Other key parts include the TPS63001. By type, the board carries 9 capacitors, 7 resistors, 4 ICs, 4 jumpers, 3 switches and 2 diodes.
It belongs with the displays & leds designs in this gallery.
From the project
This is a 3D weather station! You can choose between displaying daily waifu pics and the current weather. No external libraries used!
This is a 3D weather station! You can choose between displaying daily waifu pics and the current weather. No external libraries used!
Made for #asylum. The main API code is at https://github.com/cheyao/short with nest :D
To change the settings, edit firmware/settings.h! The weather info is mostly parsed on nest.
[ x ] I ran DRC in KiCad and have made sure there are 0 errors!
Main components on the Aniweather
Aniweather bill of materials (BOM)
31 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ST7735 | U1 |
| 1 | ~ | WEMOS_C1_mini | U2 |
| 1 | ~ | TP4056 | U3 |
| 1 | TPS63001 | Texas_DRC0010J_ThermalVias | U5 |
| 1 | Battery_Cell | TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | BT1 |
| 4 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 1 | SW_DIP_x01 | SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 2 | SW_Push | SW_PUSH_6mm | SW2, SW3 |
| 1 | 1N5817 D | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 2.2uH | NR3015T2R2M | L1 |
| 5 | Tiny | C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C3, C4, C9 |
| 1 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 3 | 10uF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C6, C7, C8 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
Aniweather design files
The KiCad project lives in the hackclub/asylum repository on GitHub; these links point at the commit this page was built from.
Aniweather: common questions
How big is the Aniweather PCB?
The Aniweather measures 55 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aniweather?
31 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aniweather design files?
From the hackclub/asylum repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Aniweather design in my own project?
Yes, under the terms of its MIT license, which hackclub chose for the repository.
atopile
AxxAxx
eez-open