Half life starbie
hadiwastaken·half-life-starbie
About the Half life starbie PCB
Half life starbie is an open source ESP32 PCB design by hadiwastaken, published on GitHub. It is a 2-layer board measuring 119.6 × 99.4 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
It belongs with the iot & wireless designs in this gallery.
From the project
DAY 1&2: On day1 and 2 I made the environment and setup libraires and read guide and see some tutorials for KICAD software and fun like 67 . DAY 3&4 ON day 3 and 4 I started to make schematics with the help of guide and my favorite moral person AI. DAY 5&6 On day 5 and 6 I upgrad
DAY 1&2: On day1 and 2 I made the environment and setup libraires and read guide and see some tutorials for KICAD software and fun like 67 . DAY 3&4 ON day 3 and 4 I started to make schematics with the help of guide and my favorite moral person AI. DAY 5&6 On day 5 and 6 I upgrade to PCB and try to figure out tool while listening to my artist central cee also I made some customization in my PCB I am attaching image of my PCB . DAY 7 AT LAST I made documents ready and write read me file also made firmware folder.
Main components on the Half life starbie
Half life starbie bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | MCU_Seeed_ESP32C3 | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | MPU6050_Module | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
Half life starbie design files
The KiCad project lives in the hadiwastaken/half-life-starbie repository on GitHub; these links point at the commit this page was built from.
- Layoutki-cad-starbie.kicad_pcb
- Schematicki-cad-starbie.kicad_sch
- BOMBOM.csv
Half life starbie: common questions
What microcontroller does the Half life starbie use?
The Half life starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half life starbie PCB?
The Half life starbie measures 119.6 × 99.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life starbie?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Half life starbie design files?
From the hadiwastaken/half-life-starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Half life starbie design in my own project?
The repository has no license, so all rights stay with hadiwastaken. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life starbie without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k