Lm386-audio amplifier
hakimmusazada·Audio-PCB-Designs·01-lm386-audio-amplifier/kicad/lm386-audio-amplifier.kicad_pcb
About the Lm386-audio amplifier PCB
Lm386-audio amplifier is an open source PCB design by hakimmusazada, published on GitHub. It is a 2-layer board measuring 39.5 × 49.5 mm, with 14 components from 14 distinct parts.
Other key parts include the TL072 and L7809. By type, the board carries 7 capacitors, 3 connectors, 2 ICs and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
Two analog audio PCBs designed in KiCad: an LM386 power amplifier and a TL072 bass/treble equalizer, from schematic to hand-fabricated board.
A compact single-sided audio power amplifier built around the LM386. It takes a line-level signal (phone, MP3 player, signal generator), adds a volume control, and drives a small 8 Ω speaker. The board was hand-fabricated and tested during a university electronics course.
The input of the 7809 needs a couple of volts of headroom, so the board should be fed from roughly 12 V DC.

Main components on the Lm386-audio amplifier
Lm386-audio amplifier bill of materials (BOM)
14 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL072 LM386 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | L7809 | TO-220-3_Vertical | U2 |
| 1 | PWR | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | IN | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | OUT | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 100K 10k | Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 100nF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C1 |
| 1 | 470uF 16V | CP_Radial_D8.0mm_P3.50mm | C2 |
| 1 | 100NF 10uF 16V | CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 50nF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C4 |
| 1 | 1NF 100nF | C_Disc_D5.1mm_W3.2mm_P5.00mm | C5 |
| 1 | 47NF 100uF 25V | CP_Radial_D6.3mm_P2.50mm | C6 |
| 1 | 250uF 16V | CP_Radial_D8.0mm_P3.50mm | C7 |
| 1 | 100K 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Lm386-audio amplifier design files
The KiCad project lives in the hakimmusazada/Audio-PCB-Designs repository on GitHub; these links point at the commit this page was built from.
Lm386-audio amplifier: common questions
How big is the Lm386-audio amplifier PCB?
The Lm386-audio amplifier measures 39.5 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lm386-audio amplifier?
14 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lm386-audio amplifier design files?
From the hakimmusazada/Audio-PCB-Designs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lm386-audio amplifier design in my own project?
The repository has no license, so all rights stay with hakimmusazada. Use it as a reference, and ask the author before reusing the design.
More boards in Audio-PCB-Designs
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687