21 open source boards using the L7809
Real designs built with the L7809, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Mainboard
Cluradev
120 × 90 mm162 parts4LNo license118Alim10o
acmo0
137.8 × 91.4 mm86 parts2LGPL-3.014DIY-UPS-for-WiFi-Router
Ozonised
90 × 70 mm15 parts2LNo license7Amplifier RD15HVF1
SatcomRadio
100 × 50 mm23 parts2LMIT4STM32
EuroSID
activexray
100 × 100 mm222 parts2LNo license3Placa buck
fadelrio
126 × 66.5 mm52 parts2LNo license3Guitar-Amp
james-wren
184.5 × 61 mm28 parts2LMIT2Buck
fberni21
88.4 × 81 mm68 parts2LNo license1ESP32
Nixie-Clock: Controller
konradmoesch
228.6 × 69.9 mm63 parts2LNo license1Shield
jesuscuadrul2
102 × 115.1 mm37 parts2LNo license1ESP32
SBC
ahmedsiddyq
108.2 × 124.9 mm366 parts2LNo license0AVR/Arduino
AmplifierBoard
dangrie158
210 × 104 mm225 parts2LMIT0PIC
ATE-PCB-DESIGN
muhin19
147 × 78.5 mm110 parts2LNo license0AVR/Arduino
Talking Clock
jsyk
189.2 × 72.4 mm81 parts2LNo license0Alim
acmo0
84.5 × 65.3 mm60 parts2LGPL-3.014ESP32
Meowpass 0.2
hb9ezs
194.5 × 40 mm19 parts4LGPL-3.011AVR/Arduino
Power cct
AronAyub
108.6 × 145 mm75 parts2LNo license6AudioSID
ddraig68k
100 × 100 mm69 parts4LMIT29Pwm
fberni21
43.9 × 54.9 mm22 parts2LNo license1AVR/Arduino
Lineinterrupter
profdc9
74.4 × 99.3 mm85 parts2LNo license56AVR/Arduino
Lineinterrupter
iduwhux
74.4 × 99.3 mm85 parts2LNo license1
How designs wire the L7809
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the L7809 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 14 of 19 designs, most often 330 nF (then 100 nF).
- The OUT pin is tied to 9V on 13 of 19 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: Signal 74% · 12V 26% |
|
| GNDpin 2 | Connected to: GND 95% | — |
| OUTpin 3 | Connected to: 9V 68% · a signal 26% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mainboard by Cluradev, Lineinterrupter by profdc9, AudioSID by ddraig68k and Alim by acmo0.
The L7809 in open source designs
The gallery holds 21 open source boards using the L7809 from 19 GitHub repositories; a typical one measures about 108.2 × 81 mm and carries around 69 components.
86% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Mainboard by Cluradev.
Microcontrollers on boards using the L7809
What boards using the L7809 are built for
L7809: common questions
Where can I find a L7809 reference design?
Each of the 21 boards on this page is a real design using the L7809. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L7809 IN pin connected?
The IN pin has a capacitor to GND on 14 of 19 designs, most often 330 nF (then 100 nF). Counted from the KiCad layouts of 19 open source designs using the L7809.
How is the L7809 OUT pin connected?
The OUT pin is tied to 9V on 13 of 19 designs (a signal on 5). Counted from the KiCad layouts of 19 open source designs using the L7809.
What parts are used alongside the L7809?
The L7805, ATTINY85-20PU, IR2104, LM339 and NE555 appear in the most repositories here.
Which microcontrollers do boards using the L7809 use?
Most are built on AVR/Arduino (5), ESP32 (3), STM32 (2) and PIC (1).
How big is a typical board using the L7809?
The median is 108.2 × 81 mm, and 86% are two-layer designs.
What is the most popular open source board using the L7809?
By GitHub stars, Mainboard by Cluradev, with 118 stars.
Can I simulate one of these boards using the L7809 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.