IoTLynx
halherta·IoTLynx
About the IoTLynx PCB
IoTLynx is an open source ESP32 PCB design by halherta, published on GitHub. It is a 2-layer board measuring 38 × 58 mm, with 23 components from 14 distinct parts.
Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the LM1117MP-3.3. By type, the board carries 6 diodes, 6 resistors, 5 capacitors, 3 connectors and 2 ICs.
It belongs with the iot & wireless, dev boards & breakouts and sensors designs in this gallery.
From the project
Development board for makers and hobbyists
A maker-friendly ESP32-C6 development board designed for accessibility and ease of use.
IoTLynx is a microcontroller development board based on Espressif's ESP32-C6 microcontroller (ESP32-C6-MINI-1 module). Designed with accessibility in mind, the IoTLynx platform caters to makers, hobbyists, and newcomers to programming and electronics. Though the board supports C programming, it was specifically designed to run MicroPython—a choice that aligns with its philosophy of ease of use. With the MicroPython REPL pre-loaded and ready to run, users can start coding immediately without the hassle of…

Main components on the IoTLynx
IoTLynx bill of materials (BOM)
23 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C6-MINI-1/U | ESP32-C6-MINI-1 | U1 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4110 | J1 |
| 2 | CONN_01X14 Conn_01x14 | PinSocket_1x14_P2.54mm_Vertical | J2, J3 |
| 1 | SW2 | SW_SPST_PTS810 | BOOT(I09) |
| 3 | LESD5D5.0CT1G | D_SOD-523 | D1, D2, D3 |
| 2 | 1N5819 | D_SOD-123 | D4, D6 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D5 |
| 3 | 1u | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C1, C2, C3 |
| 1 | 10U 10u | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C4 |
| 1 | 1u | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 2 | 5.1K 5.1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 3 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5 |
| 1 | 220 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
IoTLynx design files
The KiCad project lives in the halherta/IoTLynx repository on GitHub; these links point at the commit this page was built from.
- LayoutIoTLynx.kicad_pcb
- SchematicIoTLynx.kicad_sch
- BOMproduction/bom.csv
IoTLynx: common questions
What microcontroller does the IoTLynx use?
The IoTLynx is built around the ESP32-C6-MINI-1/U, from the ESP32 family.
How big is the IoTLynx PCB?
The IoTLynx measures 38 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IoTLynx?
23 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IoTLynx design files?
From the halherta/IoTLynx repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IoTLynx design in my own project?
The repository has no license, so all rights stay with halherta. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IoTLynx without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k