TC DRIVE REVA
hankenken·Train_control·hardware/driver-board/source/TC_DRIVE_REVA.kicad_pcb
About the TC DRIVE REVA PCB
TC DRIVE REVA is an open source PCB design by hankenken, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 35 components from 9 distinct parts.
Other key parts include the DRV8871DDAR. By type, the board carries 20 resistors, 9 capacitors, 4 ICs and 2 diodes.
From the project
回路図と部品配置の草案。未配線・未実機検証。発注用ガーバーではありません。 100×100mm、2層、4系統、12V専用。JLCPCB向け表面実装を想定し、コネクタを載せず電線を直付けします。 制御基板TC IO Rev CのJ10〜J13へ接続し、DRV8871の完成モジュール4個をこの基板で置き換える計画です。
回路図と部品配置の草案。未配線・未実機検証。発注用ガーバーではありません。 100×100mm、2層、4系統、12V専用。JLCPCB向け表面実装を想定し、コネクタを載せず電線を直付けします。 制御基板TC IO Rev CのJ10〜J13へ接続し、DRV8871の完成モジュール4個をこの基板で置き換える計画です。
メーカーTI SLVSCY9Bを今回取得し、本文3/5/8/9/15ページの端子・入力・電流式・レイアウトを参照。 DRV8871DDARはIN1=3番、IN2=2番、VM=5番、OUT1=6番、OUT2=8番、GND=1番、PGND=7番、露出パッド=GND。 INのHIGHしきい値1.5V以上、LOW0.5V以下。制御基板の3.3Vロジックを受ける構成です。 VMの定格動作範囲は6.5〜45Vですが、この基板は12V限定で設計します。
Main components on the TC DRIVE REVA
TC DRIVE REVA bill of materials (BOM)
35 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | DRV8871DDAR | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U1, U2, U3, U4 |
| 1 | SS34_CANDIDATE | D_SMA | D1 |
| 1 | SMBJ18A_CANDIDATE | D_SMB | D2 |
| 1 | 470UF_35V_SMD_CANDIDATE 470uF_35V_SMD_CANDIDATE | CP_Elec_10x10.5 | C1 |
| 4 | 100NF_50V_X7R 100nF_50V_X7R | C_0805_2012Metric | C2, C4, C6, C8 |
| 4 | 100UF_35V_SMD_CANDIDATE 100uF_35V_SMD_CANDIDATE | CP_Elec_6.3x7.7 | C3, C5, C7, C9 |
| 4 | 53.6k_1% | R_0805_2012Metric | R1, R2, R3, R4 |
| 8 | 100R_1% | R_0805_2012Metric | R5, R7, R9, R11, R13, R15, R17, R19 |
| 8 | 10k_1% | R_0805_2012Metric | R6, R8, R10, R12, R14, R16, R18, R20 |
TC DRIVE REVA design files
The KiCad project lives in the hankenken/Train_control repository on GitHub; these links point at the commit this page was built from.
TC DRIVE REVA: common questions
How big is the TC DRIVE REVA PCB?
The TC DRIVE REVA measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TC DRIVE REVA?
35 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TC DRIVE REVA design files?
From the hankenken/Train_control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TC DRIVE REVA design in my own project?
The repository has no license, so all rights stay with hankenken. Use it as a reference, and ask the author before reusing the design.