TC IO REVD MINI

hankenken·Train_control·hardware/control-board-mini/source/TC_IO_REVD_MINI.kicad_pcb

TC IO REVD MINI PCB layout, top view — open source board by hankenken

About the TC IO REVD MINI PCB

TC IO REVD MINI is an open source PCB design by hankenken, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 46 components from 9 distinct parts.

Other key parts include the CD74HC221M96, SN74HC08DR and MCP100T-300I/TT. By type, the board carries 25 resistors, 11 capacitors and 6 ICs.

From the project

50×40mm(配線前の暫定寸法)・未配線・発注不可。 100×100mm Rev Cを保存し、ユーザーの小型化とToF指定に合わせた別リビジョンです。 面積は10,000→2,000mm²(80%減)。コネクタ部品なし、実装46点。 全体の物理的最小寸法を証明したものではなく、2層配線・実装条件の確認で寸法が変わる可能性があります。

50×40mm(配線前の暫定寸法)・未配線・発注不可。 100×100mm Rev Cを保存し、ユーザーの小型化とToF指定に合わせた別リビジョンです。 面積は10,000→2,000mm²(80%減)。コネクタ部品なし、実装46点。 全体の物理的最小寸法を証明したものではなく、2層配線・実装条件の確認で寸法が変わる可能性があります。

- ポイント4系統のワンショット・個別VR・方向ゲート・電源監視を維持。 - ユーザー指定のC2167387(470nF±10%)と個別VRでの概略時間調整を維持。 - ToFはI2Cで接続するため、MCP3008(U1)、ADC用R5、C5、C12を削除。 - SPIのMOSI/MISO/SCLK/CS配線と、アナログセンサ端子・JP1を削除。 - Pi GPIO2/3のI2Cは維持。VL53L4CD×8は別のI2C切替・電源基板経由で接続する計画。 - ToF切替・電源基板はまだ設計確定していない。Piの3.3Vから8台のセンサを直接給電する構成ではない。

Main components on the TC IO REVD MINI

TC IO REVD MINI bill of materials (BOM)

46 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
CD74HC221M96
U2, U3
3
SN74HC08DR
U4, U5, U6
1
MCP100T-300I/TT
U7
4
3224W-1-104E
VR1, VR2, VR3, VR4
4
470nF_10%_X7R_50V
C1, C2, C3, C4
6
100NF_X7R_50V
100nF_X7R_50V
C6, C7, C8, C9, C10, C11
1
10UF_X7R_25V
10uF_X7R_25V
C13
4
150k_1%
R1, R2, R3, R4
21
10k_1%
R6, R7, R8, R9, R10, R11, R12, R13 +13

TC IO REVD MINI design files

The KiCad project lives in the hankenken/Train_control repository on GitHub; these links point at the commit this page was built from.

TC IO REVD MINI: common questions

How big is the TC IO REVD MINI PCB?

The TC IO REVD MINI measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TC IO REVD MINI?

46 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TC IO REVD MINI design files?

From the hankenken/Train_control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TC IO REVD MINI design in my own project?

The repository has no license, so all rights stay with hankenken. Use it as a reference, and ask the author before reusing the design.

More boards in Train_control