TC DRIVE REVB
hankenken·Train_control·hardware/driver-board-mini/source/TC_DRIVE_REVB.kicad_pcb
About the TC DRIVE REVB PCB
TC DRIVE REVB is an open source PCB design by hankenken, published on GitHub. It is a 2-layer board measuring 60 × 45 mm, with 35 components from 9 distinct parts.
Other key parts include the DRV8871DDAR. By type, the board carries 20 resistors, 9 capacitors, 4 ICs and 2 diodes.
From the project
60×45mm(暫定)・未配線・製造不可。100×100mmのRev Aと既存制御基板を変更せず、別リビジョンとして作成。
60×45mm(暫定)・未配線・製造不可。100×100mmのRev Aと既存制御基板を変更せず、別リビジョンとして作成。
基板面積は10,000→2,700mm²(73%減)。12V、DRV8871×4、表面実装35点、コネクタなし、制御3線×4組とポイント2線×4組、電源2線の9直付け位置を維持しています。 電気的なネット・部品値はRev Aと同一であることを検査しました。4回路入りの集約基板として詰めた配置案であり、実装・配線・熱設計後も維持できる最小寸法を保証するものではありません。
- 4つのDRV8871を2×2配置。各チャンネルの入力・電流制限・デカップリング・100µFを近接配置。 - 大容量470µFと電源保護候補は上側へ集約。電解コンデンサを削除して面積だけ小さくする変更はしていません。 - 直付け穴は電源/コイル用が直径1.3mm・ランド3mm、制御用が直径1.0mm・ランド2mm。電線に引張り止めを設ける前提。 - 取付穴は4個のM2用2.2mm穴へ変更。外形から各3mm、中心間54×39mm。Rev AのM3とは互換ではありません。 - 三つの1mmフィデューシャルを追加。大半の部品記号をF.Fabへ移し、上面シルクはICと接続位置を優先。 -…
Main components on the TC DRIVE REVB
TC DRIVE REVB bill of materials (BOM)
35 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | DRV8871DDAR | DRV8871_DDA_ThermalVias_0p3 | U1, U2, U3, U4 |
| 1 | SS34_CANDIDATE | D_SMA | D1 |
| 1 | SMBJ18A_CANDIDATE | D_SMB | D2 |
| 1 | 470UF_35V_SMD_CANDIDATE 470uF_35V_SMD_CANDIDATE | CP_Elec_10x10.5 | C1 |
| 4 | 100NF_50V_X7R 100nF_50V_X7R | C_0805_2012Metric | C2, C4, C6, C8 |
| 4 | 100UF_35V_SMD_CANDIDATE 100uF_35V_SMD_CANDIDATE | CP_Elec_6.3x7.7 | C3, C5, C7, C9 |
| 4 | 53.6k_1% | R_0805_2012Metric | R1, R2, R3, R4 |
| 8 | 100R_1% | R_0805_2012Metric | R5, R7, R9, R11, R13, R15, R17, R19 |
| 8 | 10k_1% | R_0805_2012Metric | R6, R8, R10, R12, R14, R16, R18, R20 |
TC DRIVE REVB design files
The KiCad project lives in the hankenken/Train_control repository on GitHub; these links point at the commit this page was built from.
TC DRIVE REVB: common questions
How big is the TC DRIVE REVB PCB?
The TC DRIVE REVB measures 60 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TC DRIVE REVB?
35 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TC DRIVE REVB design files?
From the hankenken/Train_control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TC DRIVE REVB design in my own project?
The repository has no license, so all rights stay with hankenken. Use it as a reference, and ask the author before reusing the design.