TC SENSOR BUFFER REVB MINI
hankenken·Train_control·hardware/sensor-buffer-mini/source/TC_SENSOR_BUFFER_REVB_MINI.kicad_pcb
About the TC SENSOR BUFFER REVB MINI PCB
TC SENSOR BUFFER REVB MINI is an open source PCB design by hankenken, published on GitHub. It is a 2-layer board measuring 45 × 32 mm, with 21 components from 5 distinct parts.
Other key parts include the MCP6004T-I/SL. By type, the board carries 11 capacitors, 8 resistors and 2 ICs.
It belongs with the sensors designs in this gallery.
From the project
配線前の配置草案です。発注用データではありません。 旧100×100mm版を保存し、別リビジョンとして小型化しました。面積1,440mm²、旧比85.6%削減。 MCP6004T-I/SL×2、100Ω×8、1nF×8、100nF×2、10µF×1の実装21点と各ネット接続を維持しています。
配線前の配置草案です。発注用データではありません。 旧100×100mm版を保存し、別リビジョンとして小型化しました。面積1,440mm²、旧比85.6%削減。 MCP6004T-I/SL×2、100Ω×8、1nF×8、100nF×2、10µF×1の実装21点と各ネット接続を維持しています。
- SOIC14を2個と、手直ししやすい0805/1206を維持。JLCPCB実装部品の再選定を最小限にします。 - センサ8組の3線直付け位置を上下4組ずつに分け、配線の引き出しを確保。 - 従来の8組のGND/OUTと別電源パッドを、共通GND・3.3V・8信号の10線へ集約。 - 直付け穴径0.8mm、パッド1.6mm、ピッチ2.0mm、パッド間隔0.4mm。AWG26程度の信号線を目安とし、より線のはんだ上がり後の外径を現物で確認。 - 取付はM2用2.2mm穴4個。中心は(2.8,2.8)、(42.2,2.8)、(2.8,29.2)、(42.2,29.2)mm。 - 現段階では実用的な配置目標寸法であり、理論上の最小寸法を証明したものではありません。最終配線・GND面・信号評価で寸法の微調整が必要になる場合があります。
Main components on the TC SENSOR BUFFER REVB MINI
TC SENSOR BUFFER REVB MINI bill of materials (BOM)
21 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP6004T-I/SL | SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 8 | 1nF_5%_C0G | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 2 | 100NF_50V_X7R 100nF_50V_X7R | C_0805_2012Metric | C9, C10 |
| 1 | 10UF_10V_X7R 10uF_10V_X7R | C_1206_3216Metric | C11 |
| 8 | 100R_1% | R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
TC SENSOR BUFFER REVB MINI design files
The KiCad project lives in the hankenken/Train_control repository on GitHub; these links point at the commit this page was built from.
TC SENSOR BUFFER REVB MINI: common questions
How big is the TC SENSOR BUFFER REVB MINI PCB?
The TC SENSOR BUFFER REVB MINI measures 45 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TC SENSOR BUFFER REVB MINI?
21 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TC SENSOR BUFFER REVB MINI design files?
From the hankenken/Train_control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TC SENSOR BUFFER REVB MINI design in my own project?
The repository has no license, so all rights stay with hankenken. Use it as a reference, and ask the author before reusing the design.
More boards in Train_control
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956