TC SENSOR BUFFER REVA

hankenken·Train_control·hardware/sensor-buffer/source/TC_SENSOR_BUFFER_REVA.kicad_pcb

TC SENSOR BUFFER REVA PCB layout, top view — open source board by hankenken

About the TC SENSOR BUFFER REVA PCB

TC SENSOR BUFFER REVA is an open source PCB design by hankenken, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 21 components from 5 distinct parts.

Other key parts include the MCP6004T-I/SL. By type, the board carries 11 capacitors, 8 resistors and 2 ICs.

It belongs with the sensors designs in this gallery.

From the project

回路図と部品配置の草案。未配線・未検証、製造不可。 100×100mm、2層、3.3V専用、8入力。架線柱の上ではなく制御基板の近くへ設置します。 小型一体モジュールPololu QTRX-HD-01Aを各A/B位置へ設置し、車両の改造は不要です。

回路図と部品配置の草案。未配線・未検証、製造不可。 100×100mm、2層、3.3V専用、8入力。架線柱の上ではなく制御基板の近くへ設置します。 小型一体モジュールPololu QTRX-HD-01Aを各A/B位置へ設置し、車両の改造は不要です。

Pololu公式回路図にはアナログOUTの47kΩプルアップが示されています。 反射条件によって出力源インピーダンスが高くなり、MCP3008のサンプル保持容量の充電に影響する可能性があります。 そのためMCP6004T-I/SLを2個使った8個の電圧フォロワを挿入します。 入力+はセンサOUT、入力−は同じアンプの出力へ直結。増幅率は1です。

Microchip DS20001733Lを取得し、SOIC14の端子、1.8〜6V動作、RRIO、1MHzの仕様を確認しました。 3.3V動作、無負荷時の消費電流は典型100µA/アンプ、8個で典型0.8mA(基板の最大消費電流ではありません)。 入力オフセット・レール付近の出力余裕・入力源とケーブルの影響は校正・実測対象です。

Main components on the TC SENSOR BUFFER REVA

TC SENSOR BUFFER REVA bill of materials (BOM)

21 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MCP6004T-I/SL
U1, U2
8
1nF_5%_C0G
C1, C2, C3, C4, C5, C6, C7, C8
2
100NF_50V_X7R
100nF_50V_X7R
C9, C10
1
10UF_10V_X7R
10uF_10V_X7R
C11
8
100R_1%
R1, R2, R3, R4, R5, R6, R7, R8

TC SENSOR BUFFER REVA design files

The KiCad project lives in the hankenken/Train_control repository on GitHub; these links point at the commit this page was built from.

TC SENSOR BUFFER REVA: common questions

How big is the TC SENSOR BUFFER REVA PCB?

The TC SENSOR BUFFER REVA measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TC SENSOR BUFFER REVA?

21 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TC SENSOR BUFFER REVA design files?

From the hankenken/Train_control repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TC SENSOR BUFFER REVA design in my own project?

The repository has no license, so all rights stay with hankenken. Use it as a reference, and ask the author before reusing the design.

More boards in Train_control

Similar boards