Fast SiPM Photodetector

hannesduske·Fast_SiPM_Photodetector·02_PCB/Fast_SiPM_Photodetector/Fast_SiPM_Photodetector.kicad_pcb

Fast SiPM Photodetector PCB layout, top view — open source board by hannesduske

About the Fast SiPM Photodetector PCB

Fast SiPM Photodetector is an open source PCB design by hannesduske, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 60 × 40 mm, with 76 components from 41 distinct parts.

Other key parts include the LT8365JMSE, LMR51606XDBVR, MICROFC-30035-SMT-TR1, NCP731ADNADJR2G and GALI-S66. By type, the board carries 28 capacitors, 18 resistors, 7 ICs, 6 inductors, 3 transistors and 3 connectors.

It belongs with the sensors, audio and power & battery designs in this gallery.

From the project

An open-hardware SiPM photodetector with integrated low-noise amplifier, single-photon resolution, and temperature sensing for active thermal control.

This photodetector is built around the fast output of the onsemi MicroFC-30035 silicon photomultiplier (SiPM). It combines an adjustable sensor-bias supply, an integrated low-noise amplifier, and an analog temperature sensor for external temperature control. The detector achieves single photon resolution.

- 1. Technical Specification - 1.1 Key Features - 1.2 Design Specification - 1.3 The MicroFC-30035 SiPM - 2. Circuit Design - 2.1 Overview - 2.2 Input Protection - 2.3 HV Power Supply - 2.4 LV Power Supply - 2.5 Photodetector - 2.6 Amplifier - 2.7 Temperature Sensor - 3. PCB Layout - 3.1…

Fast SiPM Photodetector, from the project README
From the project README

Main components on the Fast SiPM Photodetector

LT8365JMSELMR51606XDBVRMICROFC-30035-SMT-TR1NCP731ADNADJR2GGALI-S66TLV70033DDCRMCP9700AX-ETT

Fast SiPM Photodetector bill of materials (BOM)

76 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LT8365JMSE
IC1
1
LMR51606XDBVR
LMR51606XFDBVR
IC2
1
MICROFC-30035-SMT-TR1
IC3
1
NCP731ADNADJR2G
IC4
1
GALI-S66
U1
1
TLV70033DDCR
U2
1
MCP9700AX-ETT
MCP9700Ax-ETT
U3
1
PJA3463_R1_00001
Q1
2
MMBT6427LT1G
Q2, Q3
1
1778764
PTSM 0,5/ 2-HH-2,5-SMD R32
J1
1
SMA
J2
1
1778780
PTSM 0,5/ 4-HH-2,5-SMD R32
J3
1
MFU0603FF03000
F1
6
S0941-46R
MP1, MP2, MP3, MP4, MP5, MP6
1
3314J-1-102
RV1
1
JS202011JCQN
SW1
1
SZMM3Z10VT1G
D1
1
RB021VAM90TR
D2
2
BLM18AG601SN1D
FB1, FB3
1
7443732448100
L1
Show 21 more
QtyPartRefs
1
74404052470
L2
1
1008CS-222XGRC
L3
1
0603HP-R10XGRW
L4
6
10u;50V
C1, C2, C7, C10, C27, C28
6
100n;100V
C3, C9, C12, C19, C25, C29
1
1u;16V
C4
1
1n;16V
C5
1
220n;16V
C6
6
2.2u;35V
C11, C13, C17, C18, C23, C24
5
10n;100V
C14, C15, C16, C21, C26
2
10nF;25V;C0G
C20, C22
6
100k;1%
R1, R3, R7, R13, R14, R16
1
91k;1%
R2
1
130k;1%
R4
2
36k;1%
R5, R9
3
2k;1%
R6, R10, R12
1
27k;1%
R8
1
13k;1%
R11
1
4.3k;1%
R15
1
169;1%
R17
1
10k;1%
R18

Fast SiPM Photodetector design files

The KiCad project lives in the hannesduske/Fast_SiPM_Photodetector repository on GitHub; these links point at the commit this page was built from.

Fast SiPM Photodetector: common questions

How big is the Fast SiPM Photodetector PCB?

The Fast SiPM Photodetector measures 60 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Fast SiPM Photodetector?

76 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fast SiPM Photodetector design files?

From the hannesduske/Fast_SiPM_Photodetector repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fast SiPM Photodetector design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which hannesduske chose for the repository.

Similar boards