7 open source boards using the TLV70033DDCR
Real designs built with the TLV70033DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Ossc
marqs85
124.6 × 68.8 mm259 parts4LNo license162FPGA
N64Advanced v2 (ADV7513 Version)
borti4938
80 × 89.8 mm135 parts4LCERN-OHL-W-2.073STM32
Relaymux
PetteriAimonen
120.4 × 100.4 mm55 parts2LBSD-2-Clause18N64rgb
borti4938
61.2 × 32.8 mm60 parts2LGPL-3.014RP2040/RP2350
V2
GearBoxFox
178.7 × 150.9 mm102 parts2LNo license2Fast SiPM Photodetector
hannesduske
60 × 40 mm76 parts4LCERN-OHL-P-2.01RP2040/RP2350
RPI-PVSA VGA, SD Card & Audio Demo Board for Pico
GearBoxFox
85 × 56 mm67 parts4LNo license2
How designs wire the TLV70033DDCR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV70033DDCR connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to 5V on 5 of 6 designs.
- The EN pin is tied to 5V on 5 of 6 designs.
- The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 83% · a signal 17% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ENpin 3 | Connected to: 5V 83% · a signal 17% |
|
| NCpin 4 | Connected to: Not connected 67% · GND 33% | — |
| OUTpin 5 | Connected to: 3.3V 67% · a signal 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ossc pcb by marqs85, N64Advanced v2 (ADV7513 Version) by borti4938, Relaymux by PetteriAimonen and N64rgb pcb by borti4938.
The TLV70033DDCR in open source designs
The gallery holds 7 open source boards using the TLV70033DDCR from 6 GitHub repositories; a typical one measures about 85 × 68.8 mm and carries around 76 components.
57% use four copper layers or more, and 57% carry an open source license.
The most starred is Ossc pcb by marqs85.
Microcontrollers on boards using the TLV70033DDCR
What boards using the TLV70033DDCR are built for
TLV70033DDCR: common questions
Where can I find a TLV70033DDCR reference design?
Each of the 7 boards on this page is a real design using the TLV70033DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV70033DDCR IN pin connected?
The IN pin is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV70033DDCR.
How is the TLV70033DDCR EN pin connected?
The EN pin is tied to 5V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TLV70033DDCR.
How is the TLV70033DDCR OUT pin connected?
The OUT pin is tied to 3.3V on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the TLV70033DDCR.
Which microcontrollers do boards using the TLV70033DDCR use?
Most are built on FPGA (2), RP2040/RP2350 (2) and STM32 (1).
How big is a typical board using the TLV70033DDCR?
The median is 85 × 68.8 mm, and 43% are two-layer designs.
What is the most popular open source board using the TLV70033DDCR?
By GitHub stars, Ossc pcb by marqs85, with 162 stars.
Can I simulate one of these boards using the TLV70033DDCR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.