Hass-Room-Sensor
Hass-Room-Sensor·Hass-Room-Sensor·ecad/HassRoomSensor.kicad_pcb
About the Hass-Room-Sensor PCB
Hass-Room-Sensor is an open source ESP32 PCB design by Hass-Room-Sensor, published on GitHub under the MIT license. It is a 2-layer board measuring 55 × 40 mm, with 25 components from 16 distinct parts.
Its main chip is the XIAO ESP32C6, from the ESP32 family. Other key parts include the SCD40-D-R2 and BME690. By type, the board carries 8 capacitors, 8 resistors, 4 connectors, 3 ICs and 2 diodes.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
Home Assistant compatible sensor platform allowing to connect with ZigBee and ESPHome support.
Room Sensor for Home Assistant. There are two sensors that can be populated.
Temperature Humidity Pressure air quality (IAQ) level
The SCD4x has a higher accuracy with the pressure value of the BME690
Main components on the Hass-Room-Sensor
Hass-Room-Sensor bill of materials (BOM)
25 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SCD40-D-R2 Sensirion AG | XDCR_SCD40-D-R2 | U1 |
| 1 | BME690 Bosch | BME690 | U2 |
| 1 | XIAO ESP32C6 | XIAO-ESP32C6 | U3 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P1.27mm_Vertical | J1, J3 |
| 1 | 62131021021 Wurth Elektronik | J_Wurth_WR-PHD_62131021021 | J2 |
| 1 | S2B-PH-SM4-TB Conn_01x02_Pin JST Sales America Inc. | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | 150060RS75000 LED, red, 150060RS75000 Wuerth | D_0603_1608Metric | D1 |
| 1 | 150060GS75000 LED, green, 150060GS75000 Wuerth | D_0603_1608Metric | D2 |
| 3 | CL21B106KOQNNNE 10uF, 16V Samsung Electro-Mechanics | C_0805_2012Metric | C1, C6, C7 |
| 5 | CL05A104KA5NNNC 100nF, 25V Samsung Electro-Mechanics | C_0402_1005Metric | C2, C3, C4, C5, C8 |
| 1 | SR0603FR-7T130RL 130 YAGEO | R_0603_1608Metric | R1 |
| 1 | RC0402FR-071RP 1 YAGEO | R_0402_1005Metric | R2 |
| 1 | SR0603FR-0710RL 10 YAGEO | R_0603_1608Metric | R3 |
| 1 | SR0805FR-471RL 1 YAGEO | R_0805_2012Metric | R4 |
| 3 | RC0402FR-0710KP 10k YAGEO | R_0402_1005Metric | R5, R6, R8 |
| 1 | RC0402FR-138K2L 8.2k YAGEO | R_0402_1005Metric | R7 |
Hass-Room-Sensor design files
The KiCad project lives in the Hass-Room-Sensor/Hass-Room-Sensor repository on GitHub; these links point at the commit this page was built from.
Hass-Room-Sensor: common questions
What microcontroller does the Hass-Room-Sensor use?
The Hass-Room-Sensor is built around the XIAO ESP32C6, from the ESP32 family.
How big is the Hass-Room-Sensor PCB?
The Hass-Room-Sensor measures 55 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hass-Room-Sensor?
25 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hass-Room-Sensor design files?
From the Hass-Room-Sensor/Hass-Room-Sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hass-Room-Sensor design in my own project?
Yes, under the terms of its MIT license, which Hass-Room-Sensor chose for the repository.
Can I test firmware for the Hass-Room-Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k