5 open source boards using the BME690

Real designs built with the BME690, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the BME690

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BME690 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO_6 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 220 nF).
  • The VDD_8 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 220 nF).
  • The SDO_5 pin is tied to GND on 4 of 5 designs.
  • The CSB_2 pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
GND_1pin 1Connected to: GND 80% · a signal 20%
CSB_2pin 2Connected to: 3.3V 60% · a signal 40%
SDI_3pin 3Connected to: The microcontroller 60%, a connector 40%
  • Series resistor on 40% · 4.7 kΩ (1)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
SCK_4pin 4Connected to: The microcontroller 60%, a connector 40%
  • Series resistor on 40% · 4.7 kΩ (1)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
SDO_5pin 5Connected to: GND 80% · a signal 20%
VDDIO_6pin 6Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (9), 220 nF (1)
GND_2pin 7Connected to: GND 80% · a signal 20%
VDD_8pin 8Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (9), 220 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NX-ISD by Ghost3379, Hass-Room-Sensor by Hass-Room-Sensor, KiCAD converted by sai-ydev and Weather station poc by CruvixDev.

The BME690 in open source designs

The gallery holds 5 open source boards using the BME690 from 5 GitHub repositories; a typical one measures about 55 × 47 mm and carries around 62 components.

60% use four copper layers or more, and 80% carry an open source license.

The most starred is NX-ISD by Ghost3379.

Microcontrollers on boards using the BME690

BME690: common questions

Where can I find a BME690 reference design?

Each of the 5 boards on this page is a real design using the BME690. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BME690 VDDIO_6 pin?

The VDDIO_6 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 5 open source designs using the BME690.

What decoupling capacitors do designs use on the BME690 VDD_8 pin?

The VDD_8 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 5 open source designs using the BME690.

How is the BME690 SDO_5 pin connected?

The SDO_5 pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the BME690.

Which microcontrollers do boards using the BME690 use?

Most are built on ESP32 (3) and STM32 (1).

How big is a typical board using the BME690?

The median is 55 × 47 mm, and 40% are two-layer designs.

What is the most popular open source board using the BME690?

By GitHub stars, NX-ISD by Ghost3379, with 2 stars.

Can I simulate one of these boards using the BME690 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part