Matter temperature sensor

haxeko·matter-temperature-sensor·hardware/kicad/th_sensor_h2.kicad_pcb

Matter temperature sensor PCB layout, top view — open source ESP32 board by haxeko

About the Matter temperature sensor PCB

Matter temperature sensor is an open source ESP32 PCB design by haxeko, published on GitHub. It is a 2-layer board measuring 41.5 × 57.5 mm, with 44 components from 30 distinct parts.

Its main chip is the ESP32-H2-MINI-1-H4S, from the ESP32 family. Other key parts include the TPS63900DSKR, TPS3839K33DBZR and SHT40-AD1B-R3. By type, the board carries 16 resistors, 15 capacitors, 4 ICs, 2 transistors, 2 switches and 1 crystal.

It belongs with the iot & wireless, sensors and power & battery designs in this gallery.

From the project

Thiết kế firmware và phần cứng (Rev B) cho một nhiệt ẩm kế không màn hình:

Thiết kế firmware và phần cứng (Rev B) cho một nhiệt ẩm kế không màn hình:

- module ESP32-H2-MINI-1-H4S (4 MB flash, anten PCB), Matter over Thread (Sleepy End Device, ICD SIT), BLE chỉ dùng khi commissioning; - cảm biến SHT40-AD1B-R3 trên một "lưỡi" PCB tách nhiệt, đo mỗi 60 s; - nguồn 1 × CR2450 (holder SMT): P-MOSFET chống ngược cực, một bộ buck-boost TPS63900 ra 3.3 V, tụ đệm đầu vào 10 µF + 2 × 100 µF + 470 µF; - một nút USER, một nút RST, một LED; không màn hình.

Main components on the Matter temperature sensor

Matter temperature sensor bill of materials (BOM)

44 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS63900DSKR
Texas Instruments
U1
1
TPS3839K33DBZR
Texas Instruments
U3
1
ESP32-H2-MINI-1-H4S
Espressif
U4
1
SHT40-AD1B-R3
Sensirion
U5
1
AO3401A
Alpha & Omega
Q1
1
2N7002
JSCJ
Q3
1
Q13FC13500004
32.768kHz
Seiko Epson
Y1
1
DEBUG
J1
1
BS-24-B4AA016
CR2450 holder
MYOUNG
BT1
1
TS-1187A-B-A-B
USER/BOOT
XKB
SW1
1
TS-1187A-B-A-B
RST
XKB
SW2
1
KT-0603R
red
KENTO
D3
1
DFE201612E-2R2M=P2
2.2uH
Murata
L1
2
CL10A106KP8NNNC
10uF
Samsung
C1, C23
4
CL31A107MQHNNNE
100uF
Samsung
C2, C3, C21, C22
1
CL21A226MAQNNNE
22uF
Samsung
C4
1
RVT470UF6.3V67RV0038
470uF
KNSCHA
C5
3
CC0603KRX7R9BB104
100nF
YAGEO
C24, C26, C29
1
CL10A105KB8NNNC
1uF
Samsung
C25
2
CL10C180JB8NNNC
18pF
Samsung
C27, C28
Show 10 more
QtyPartRefs
1
CL10B223KB8NNNC
22nF
Samsung
C31
2
0805W8F0000T5E
0R
UNI-ROYAL
R1, R21
1
0603WAF0000T5E
0R
UNI-ROYAL
R2
1
0603WAF1052T5E
10.5k
UNI-ROYAL
R3
1
0603WAF1622T5E
16.2k
UNI-ROYAL
R4
5
0603WAF1002T5E
10k
UNI-ROYAL
R22, R23, R24, R26, R27
1
0603WAF1001T5E
1k
UNI-ROYAL
R25
2
0603WAF220JT5E
22R
UNI-ROYAL
R28, R29
2
0603WAF4703T5E
470k
UNI-ROYAL
R31, R32
1
0603WAF1004T5E
1M
UNI-ROYAL
R35

Matter temperature sensor design files

The KiCad project lives in the haxeko/matter-temperature-sensor repository on GitHub; these links point at the commit this page was built from.

Matter temperature sensor: common questions

What microcontroller does the Matter temperature sensor use?

The Matter temperature sensor is built around the ESP32-H2-MINI-1-H4S, from the ESP32 family.

How big is the Matter temperature sensor PCB?

The Matter temperature sensor measures 41.5 × 57.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Matter temperature sensor?

44 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Matter temperature sensor design files?

From the haxeko/matter-temperature-sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Matter temperature sensor design in my own project?

The repository has no license, so all rights stay with haxeko. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Matter temperature sensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards