5 open source boards using the SHT40-AD1B-R3

Real designs built with the SHT40-AD1B-R3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the SHT40-AD1B-R3

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SHT40-AD1B-R3 connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA_1 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SCL_2 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VDD_3 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 22 µF).
SDA_1pin 1Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 100% · 10 kΩ (3), 4.7 kΩ (2)
SCL_2pin 2Connected to: The microcontroller 60%
  • Pull-up to 3.3V on 100% · 10 kΩ (3), 4.7 kΩ (2)
VDD_3pin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 80% · 100 nF (5), 22 µF (1)
VSS_4pin 4Connected to: GND 100%
EP_5pin 5Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Home weather station esp32 by Norbixix, Matter temperature sensor by haxeko, SuperNicePCB by laemo10 and Thermometer by RolandThsive.

The SHT40-AD1B-R3 in open source designs

The gallery holds 5 open source boards using the SHT40-AD1B-R3 from 5 GitHub repositories; a typical one measures about 60 × 57.5 mm and carries around 44 components.

60% use four copper layers or more, and 0% carry an open source license.

The most starred is Home weather station esp32 by Norbixix.

Microcontrollers on boards using the SHT40-AD1B-R3

SHT40-AD1B-R3: common questions

Where can I find a SHT40-AD1B-R3 reference design?

Each of the 5 boards on this page is a real design using the SHT40-AD1B-R3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the SHT40-AD1B-R3 SDA_1 pin?

The SDA_1 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the SHT40-AD1B-R3.

What pull-up resistor is used on the SHT40-AD1B-R3 SCL_2 pin?

The SCL_2 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 5 open source designs using the SHT40-AD1B-R3.

What decoupling capacitors do designs use on the SHT40-AD1B-R3 VDD_3 pin?

The VDD_3 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the SHT40-AD1B-R3.

Which microcontrollers do boards using the SHT40-AD1B-R3 use?

Most are built on ESP32 (5).

How big is a typical board using the SHT40-AD1B-R3?

The median is 60 × 57.5 mm, and 40% are two-layer designs.

What is the most popular open source board using the SHT40-AD1B-R3?

By GitHub stars, Home weather station esp32 by Norbixix, with 2 stars.

Can I simulate one of these boards using the SHT40-AD1B-R3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part