Htkbd
Heinrich-XIAO·htkbd·pcb/pcb.kicad_pcb
About the Htkbd PCB
Htkbd is an open source ESP32 PCB design by Heinrich-XIAO, published on GitHub. It is a 2-layer board measuring 511.6 × 117.8 mm, with 195 components from 21 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP2112K-3.3, TCA6424ARGJR, DRV2605LDGS and BH-AAA-B5AA005. By type, the board carries 75 switches, 70 diodes, 32 resistors, 5 ICs, 5 capacitors and 4 transistors.
Main components on the Htkbd
Htkbd bill of materials (BOM)
195 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | TCA6424ARGJR | QFN50P500X500X60-33N | U3 |
| 1 | DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U4 |
| 1 | BH-AAA-B5AA005 | BH-AAA-B5AA005 | U6 |
| 4 | BSS84 | SOT-23 | Q1, Q2, Q3, Q5 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 4 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 70 | SW_Push_45deg | Cherry_ULP_TH | SW2(esc)1, SW3(1)1, SW4(2)1, SW5(3)1, SW6(4)1, SW7(5)1, SW8(6)1, SW9(7)1 +62 |
| 1 | RS601A-1020013BB | SW-TH_RS601A-1020013BB | SW5 |
| 1 | C2765186 TYPE-C 16PIN 2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 70 | D_45DEG D_45deg | D_SOD-523 | D1, D2, D3, D4, D5, D6, D7, D8 +62 |
| 4 | 1UF 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5 |
| 1 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 9 | 10K 10k | R_0805_2012Metric | R3, R4, R19, R20, R21, R22, R23, R24 +1 |
| 16 | 100K 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R7, R8, R9, R10, R11, R12 +8 |
| 2 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26, R31 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 47K 47k | R_0402_1005Metric | R27, R28, R29 |
Htkbd design files
The KiCad project lives in the Heinrich-XIAO/htkbd repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/pcb.kicad_pcb
- Schematicpcb/pcb.kicad_sch
- BOMpcb/production/bom.csv
Htkbd: common questions
What microcontroller does the Htkbd use?
The Htkbd is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Htkbd PCB?
The Htkbd measures 511.6 × 117.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Htkbd?
195 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Htkbd design files?
From the Heinrich-XIAO/htkbd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Htkbd design in my own project?
The repository has no license, so all rights stay with Heinrich-XIAO. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Htkbd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k