PowerSupply
About the PowerSupply PCB
PowerSupply is an open source PCB design by HelloAlex4, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 42.7 × 39.8 mm, with 48 components from 28 distinct parts.
Other key parts include the HUSB238, TP5100, MICRONE(Nanjing Micro One Elec) ME6212C28M5G, Diodes Incorporated AP2112K-1.8TRG1 and LM22678TJ-5.0/NOPB. By type, the board carries 25 capacitors, 8 ICs, 6 resistors, 4 diodes, 2 connectors and 2 inductors.
From the project
Documentation of the merged wigglegram camera
This Maturitätsarbeit details the design, development, and implementation of a custom-built, portable stereoscopic camera capable of capturing animated wigglegrams. While the wigglegram effect has traditionally been limited to specialized analog film cameras or bulky adapters, this project represents the world's first digital wigglegram camera outside of a few private prototypes. The camera utilizes four horizontally aligned camera modules controlled by multiple processors to capture the wigglegrams. The device surpasses most of its initial goals, such as a synchronization between the first…
Main components on the PowerSupply
PowerSupply bill of materials (BOM)
48 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUSB238 | SON50P300X300X80-11N-D | IC1 |
| 1 | TP5100 | QFN65P400X400X90-17N | U1 |
| 2 | MICRONE(Nanjing Micro One Elec) ME6212C28M5G | SOT-23-5 | U2, U4 |
| 1 | Diodes Incorporated AP2112K-1.8TRG1 | SOT-23-5 | U3 |
| 1 | LM22678TJ-5.0/NOPB | TO-263-7_TabPin8 | U9 |
| 1 | INA226AIDGSR | SOP50P490X110-10N | U10 |
| 1 | 5v to 3.3v converter | SOT-223-3_TabPin2 | U11 |
| 2 | CONN_01X07_PIN Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | SW_DPST_X2 SW_DPST_x2 | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | SS38 | D_SMA | D1 |
| 1 | D_Filled | D_SMA | D5 |
| 1 | LED | LED_0805_2012Metric | D6 |
| 1 | LED | LED_0603_1608Metric | D7 |
| 1 | 4.7uH inductor | L_APV_APH0530 | L1 |
| 1 | 10UH 10uH | L_Changjiang_FXL0630 | L2 |
| 2 | 22UF 22uF | C_0805_2012Metric | C4, C5 |
| 9 | 0.1UF 0.1uF | C_0402_1005Metric | C12, C15, C16, C19, C20, C21, C40, C42 +1 |
| 1 | 10NF 10nF | C_0603_1608Metric | C22 |
| 2 | 6.8UF 6.8uF | C_0603_1608Metric | C36, C38 |
| 1 | 180UF 180uF | CP_Elec_6.3x5.9 | C37 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10UF 10uF | C_0805_2012Metric | C39, C41, C44 |
| 7 | 1UF 1uF | C_0805_2012Metric | C64, C65, C66, C67, C137, C138, C141 |
| 1 | 0.06OHM 0.06Ohm | R_1206_3216Metric | R13 |
| 1 | 3 Ohm | R_1206_3216Metric | R14 |
| 1 | 10K 10k | R_0603_1608Metric | R19 |
| 1 | 7.5KOHM 7.5kOhm | R_0603_1608Metric | R20 |
| 1 | 470OHM 470Ohm | R_0603_1608Metric | R23 |
| 1 | R_Shunt | R_2512_6332Metric | R25 |
PowerSupply design files
The KiCad project lives in the HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera repository on GitHub; these links point at the commit this page was built from.
PowerSupply: common questions
How big is the PowerSupply PCB?
The PowerSupply measures 42.7 × 39.8 mm, has 2 copper layers and is 1.234 mm thick.
How many components are on the PowerSupply?
48 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PowerSupply design files?
From the HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PowerSupply design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
