Focus buddy
hexa3·focus-buddy·hardware/pcb/focus-buddy.kicad_pcb
About the Focus buddy PCB
Focus buddy is an open source ESP32 PCB design by hexa3, published on GitHub. It is a 2-layer board measuring 106 × 64 mm, with 18 components from 14 distinct parts.
Its main chip is the XIAO ESP32-C3, from the ESP32 family. By type, the board carries 7 resistors, 3 connectors, 3 switches, 1 IC, 1 transistor and 1 buzzer.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
Focus Buddy: an e-ink Pomodoro desk companion. XIAO ESP32-C3 firmware, KiCad PCB, OpenSCAD enclosure, all from source.
An e-ink Pomodoro companion for your desk. A little tomato with a face counts down your focus blocks on a 2.9" e-paper screen, chimes when you're done, and naps when you walk away.
- Seeed XIAO ESP32-C3 + Waveshare 2.9" e-paper (296×128) - 3 buttons, buzzer, optional LiPo with battery gauge - All through-hole, 18 parts, about 2 h to build - Light sleep between screen updates; deep sleep (≈0.05 mA) after 3 min idle. E-ink keeps the image with zero power.

Main components on the Focus buddy
Focus buddy bill of materials (BOM)
18 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO ESP32-C3 | Seeed_XIAO_THT | U1 |
| 1 | 2N3904 | TO-92_Inline_Wide | Q1 |
| 1 | EPD | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | BATT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J2 |
| 1 | XIAO_BAT | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | A | SW_PUSH_6mm_H9.5mm | SW1 |
| 1 | B | SW_PUSH_6mm_H9.5mm | SW2 |
| 1 | C | SW_PUSH_6mm_H9.5mm | SW3 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 4 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7 |
Focus buddy design files
The KiCad project lives in the hexa3/focus-buddy repository on GitHub; these links point at the commit this page was built from.
Focus buddy: common questions
What microcontroller does the Focus buddy use?
The Focus buddy is built around the XIAO ESP32-C3, from the ESP32 family.
How big is the Focus buddy PCB?
The Focus buddy measures 106 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Focus buddy?
18 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Focus buddy design files?
From the hexa3/focus-buddy repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Focus buddy design in my own project?
The repository has no license, so all rights stay with hexa3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Focus buddy without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k