Power efuse usb
HeyPCB·power-kit·boards/usb-efuse/kicad/power_efuse_usb.kicad_pcb
About the Power efuse usb PCB
Power efuse usb is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 26 × 30 mm, with 15 components from 12 distinct parts.
Other key parts include the TPS259251DRCR. By type, the board carries 5 capacitors, 5 resistors, 2 connectors, 2 diodes and 1 IC.
From the project
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
A 5 V eFuse between a USB-C supply and your project: about 2 A current limit, output clamped at 6.1 V, rides out a 20 V input, soft start and auto-retry.
Not fabricated, assembled or powered. Every number on this page is measured by KiCad 10 on the files in this folder; the full measurements are in report.json.
The protection a bench project, a LED strip or a motor driver should have between it and a USB charger: a short or an overload is limited to about 2 A and retried instead of pulling the supply down, a charger or cable that puts more than 5 V on VBUS is clamped to 6.1 V at the output…

Main components on the Power efuse usb
Power efuse usb bill of materials (BOM)
15 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS259251DRCR TPS259251 | VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm | U1 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | MX126-5.0-02P-GN01-Cu-S-A OUT | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | SMBJ24A | D_SMB | D1 |
| 1 | KT-0603G Green (OUT) | LED_0603_1608Metric | D2 |
| 2 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C1, C3 |
| 2 | CL21B105KBFNNNE 1uF | C_0805_2012Metric | C2, C5 |
| 1 | CL05B103KB5NNNC 10nF | C_0402_1005Metric | C4 |
| 2 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 0603WAF1004T5E 1M | R_0603_1608Metric | R3 |
| 1 | 0603WAF4532T5E 45.3k | R_0603_1608Metric | R4 |
| 1 | 0603WAF2201T5E 2.2k | R_0603_1608Metric | R5 |
Power efuse usb design files
The KiCad project lives in the HeyPCB/power-kit repository on GitHub; these links point at the commit this page was built from.
Power efuse usb: common questions
How big is the Power efuse usb PCB?
The Power efuse usb measures 26 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power efuse usb?
15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power efuse usb design files?
From the HeyPCB/power-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power efuse usb design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.