Power usb meter

HeyPCB·power-kit·boards/usb-c-meter/kicad/power_usb_meter.kicad_pcb

Power usb meter PCB layout, top view — open source board by HeyPCB

About the Power usb meter PCB

Power usb meter is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 32 × 24 mm, with 8 components from 7 distinct parts.

Other key parts include the INA226AIDGSR. By type, the board carries 3 connectors, 3 resistors, 1 IC and 1 capacitor.

It belongs with the power & battery designs in this gallery.

From the project

Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

Put it in a USB-C cable run and read volts, amps and watts over Qwiic: an INA226 on a 10 mOhm shunt in VBUS, with CC and USB 2.0 passed straight through.

Not fabricated, assembled or powered. Every number on this page is measured by KiCad 10 on the files in this folder; the full measurements are in report.json.

A small inline meter for logging what a USB-C device actually draws: plug the charger into IN and the device into OUT, connect the Qwiic port to a microcontroller, and read the bus voltage, current and power from an INA226 at I2C address 0x40. CC1 and CC2 run straight through, so a…

Power usb meter, from the project README
From the project README

Main components on the Power usb meter

Power usb meter bill of materials (BOM)

8 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
INA226AIDGSR
INA226
U1
1
TYPE-C-31-M-12
USB-C IN
J1
1
TYPE-C-31-M-12
USB-C OUT
J2
1
SM04B-SRSS-TB(LF)(SN)
QWIIC
J3
1
CL21B104KCFNNNE
100nF
C1
1
FMF06FTHR010-LH
10m
R1
2
0603WAF4701T5E
4.7k
R2, R3

Power usb meter design files

The KiCad project lives in the HeyPCB/power-kit repository on GitHub; these links point at the commit this page was built from.

Power usb meter: common questions

How big is the Power usb meter PCB?

The Power usb meter measures 32 × 24 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power usb meter?

8 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power usb meter design files?

From the HeyPCB/power-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power usb meter design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.

More boards in power-kit

Similar boards