Power boost 1s

HeyPCB·power-kit·boards/boost-1s/kicad/power_boost_1s.kicad_pcb

Power boost 1s PCB layout, top view — open source board by HeyPCB

About the Power boost 1s PCB

Power boost 1s is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 28 × 30 mm, with 13 components from 11 distinct parts.

Other key parts include the MT3608. By type, the board carries 4 resistors, 3 capacitors, 2 connectors, 2 diodes, 1 IC and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0

One lithium cell in, 5.1 V out: an MT3608 boost with a JST PH input and a 2.54 mm header.

Not fabricated, assembled or powered. Every number on this page is measured by KiCad 10 on the files in this folder; the full measurements are in report.json.

The small board between a single Li-ion or LiPo cell and anything that wants 5 V: an Arduino, a strip of addressable LEDs, a USB gadget. The cell plugs into a JST PH connector on the left; an MT3608 boosts its 3.0-4.2 V to 5.1 V; 5V, GND, EN and the raw cell voltage come out on a 2.54 mm header on the right, labelled on both faces. Designed with…

Power boost 1s, from the project README
From the project README

Main components on the Power boost 1s

Power boost 1s bill of materials (BOM)

13 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MT3608
U1
1
S2B-PH-K-S(LF)(SN)
BATT
J1
1
PZ254V-11-04P
OUT
J2
1
SS34
D1
1
KT-0603G
Green (5V)
D2
1
FNR4030S220MT
22uH
L1
3
CL31A226KAHNNNE
22uF
C1, C2, C3
1
0603WAF1502T5E
15k
R1
1
0603WAF2001T5E
2k
R2
1
0603WAF1003T5E
100k
R3
1
0603WAF2201T5E
2.2k
R4

Power boost 1s design files

The KiCad project lives in the HeyPCB/power-kit repository on GitHub; these links point at the commit this page was built from.

Power boost 1s: common questions

How big is the Power boost 1s PCB?

The Power boost 1s measures 28 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Power boost 1s?

13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Power boost 1s design files?

From the HeyPCB/power-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Power boost 1s design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.

More boards in power-kit

Similar boards