Power pd trigger
HeyPCB·power-kit·boards/pd-trigger/kicad/power_pd_trigger.kicad_pcb
About the Power pd trigger PCB
Power pd trigger is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 28 × 40 mm, with 17 components from 15 distinct parts.
Other key parts include the HUSB238_002DD. By type, the board carries 7 resistors, 3 diodes, 2 connectors, 2 capacitors, 1 IC and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
A USB-C Power Delivery trigger: any PD charger in, a fixed 5, 9, 12, 15 or 20 V at 3 A out on a screw terminal, picked with a DIP switch.
Not fabricated, assembled or powered. Every number on this page is measured by KiCad 10 on the files in this folder; the full measurements are in report.json.
Plug a USB-C PD charger in and get one fixed voltage out, for powering a bench project, a strip of LEDs or a 12 V tool from a laptop charger. A Hynetek HUSB238 negotiates the contract and only then turns on a P-FET onto the output terminal, so nothing downstream sees a voltage it did not ask for. A…

Main components on the Power pd trigger
Power pd trigger bill of materials (BOM)
17 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HUSB238_002DD | WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm | U1 |
| 1 | DMP3013SFV-7 DMP3013SFV | Diodes_PowerDI3333-8 | Q1 |
| 1 | TYPE-C-31-M-12 USB-C PD IN | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | MX126-5.0-02P-GN01-Cu-S-A OUT | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | 2.54-4P TPGT VSET 5/9/12/15 | SW_DIP_SPSTx04_Slide_Omron_A6S-410x_W8.9mm_P2.54mm | SW1 |
| 1 | BZT52C10 | D_SOD-123 | D1 |
| 1 | SMBJ24A | D_SMB | D2 |
| 1 | KT-0603G Green (OUT) | LED_0603_1608Metric | D3 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C1 |
| 1 | CL21B105KBFNNNE 1uF | C_0805_2012Metric | C2 |
| 1 | 0603WAF6041T5E 6.04k | R_0603_1608Metric | R1 |
| 3 | 0603WAF1002T5E 10k | R_0603_1608Metric | R2, R5, R7 |
| 1 | 0603WAF1402T5E 14k | R_0603_1608Metric | R3 |
| 1 | FRC0603F2262TS 22.6k | R_0603_1608Metric | R4 |
| 1 | 0603WAF1003T5E 100k | R_0603_1608Metric | R6 |
Power pd trigger design files
The KiCad project lives in the HeyPCB/power-kit repository on GitHub; these links point at the commit this page was built from.
Power pd trigger: common questions
How big is the Power pd trigger PCB?
The Power pd trigger measures 28 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power pd trigger?
17 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power pd trigger design files?
From the HeyPCB/power-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power pd trigger design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.
More boards in power-kit
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k