Power dual buck
HeyPCB·power-kit·boards/dual-rail/kicad/power_dual_buck.kicad_pcb
About the Power dual buck PCB
Power dual buck is an open source PCB design by HeyPCB, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 50 × 36 mm, with 30 components from 20 distinct parts.
Other key parts include the TPS563201DDCR and AP63203WU-7. By type, the board carries 13 capacitors, 6 resistors, 4 diodes, 2 ICs, 2 connectors and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
Six open power and charging boards: KiCad 10, JLCPCB-ready, CERN-OHL-S-2.0
A dual-rail buck module: 6-15 V in, 5 V / 3 A and 3.3 V / 2 A out, reverse-polarity protected.
Not fabricated, assembled or powered. Every number on this page is measured by KiCad 10 on the files in this folder; the full measurements are in report.json.
A small power module for the bench and for projects that need both 5 V and 3.3 V from one 6-15 V supply (a 12 V adapter, a 3S pack). A TPS563201 synchronous buck makes 5 V and an AP63203 makes 3.3 V, both straight from the protected input, so neither rail's load heats the other's regulator. The input has a reverse-polarity P-FET and a TVS…

Main components on the Power dual buck
Power dual buck bill of materials (BOM)
30 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS563201DDCR TPS563201 | SOT-23-6 | U1 |
| 1 | AP63203WU-7 | TSOT-23-6 | U2 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | MX126-5.0-02P-GN01-Cu-S-A VIN 6-15V | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | PZ254V-11-04P OUT | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | BZT52C10 | D_SOD-123 | D1 |
| 1 | SMAJ15A | D_SMA | D2 |
| 1 | KT-0603G Green (5V) | LED_0603_1608Metric | D3 |
| 1 | KT-0603G Green (3V3) | LED_0603_1608Metric | D4 |
| 1 | SWPA6045S4R7MT 4.7uH | L_Sunlord_SWPA6045S | L1 |
| 1 | SWPA4030S4R7MT 4.7uH | L_Sunlord_SWPA4030S | L2 |
| 2 | CL31A226KAHNNNE 22uF | C_1206_3216Metric | C1, C2 |
| 7 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C3, C4, C7, C8, C9, C12, C13 |
| 3 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C5, C6, C11 |
| 1 | CL31A106KBHNNNE 10uF | C_1206_3216Metric | C10 |
| 2 | 0603WAF1003T5E 100k | R_0603_1608Metric | R1, R4 |
| 1 | 0603WAF8202T5E 82k | R_0603_1608Metric | R2 |
| 1 | 0603WAF1502T5E 15k | R_0603_1608Metric | R3 |
| 1 | 0603WAF2201T5E 2.2k | R_0603_1608Metric | R5 |
| 1 | 0603WAF1001T5E 1k | R_0603_1608Metric | R6 |
Power dual buck design files
The KiCad project lives in the HeyPCB/power-kit repository on GitHub; these links point at the commit this page was built from.
Power dual buck: common questions
How big is the Power dual buck PCB?
The Power dual buck measures 50 × 36 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Power dual buck?
30 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power dual buck design files?
From the HeyPCB/power-kit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power dual buck design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which HeyPCB chose for the repository.
More boards in power-kit
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k