Control
hicancan·carbentra-smart-switch·electronics/control.kicad_pcb
About the Control PCB
Control is an open source ESP32 PCB design by hicancan, published on GitHub under the AGPL-3.0 license. It is a 4-layer board measuring 76 × 76 mm, with 24 components from 11 distinct parts.
Its main chip is the ESP32-C3-MINI-1-N4X, from the ESP32 family. Other key parts include the TLV1117LV33DCYR. By type, the board carries 9 capacitors, 7 resistors, 3 switches, 2 ICs and 1 connector.
From the project
CARBENTRA three-channel smart switch: hardware, firmware and local engineering checks
Open the control / power .kicadpro` projects with KiCad 10.0.5. Schematics, routed boards, rules, local symbol/footprint libraries, BOM, pin maps and mechanical contracts are retained as editable source. These native circuit files are authoritative.
Follow LOCALBUILD.md and scripts/dev.ps1 -Action electronics -BuildRoot `. The coordinator copies source into a fresh external directory, runs strict ERC/DRC, exports native netlists and independently compares PCB pad connections, then produces schematic PDF, Gerbers, Excellon drills and source-faithful presentation sheets. A nonzero rule check…
Main components on the Control
Control bill of materials (BOM)
24 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-MINI-1-N4X | ESP32_C3_MINI_1 | U1 |
| 1 | TLV1117LV33DCYR | SOT-223-3_TabPin2 | U4 |
| 1 | COLD LINK / JST-PH8 | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J3 |
| 2 | MountHole8_5 | MountHole8_5 | H1, H2 |
| 3 | B3U-1000P | SW_SPST_B3U-1000P | SW1, SW2, SW3 |
| 1 | 1u | C_0603_1608Metric | C30 |
| 1 | 10U 10u | C_0805_2012Metric | C31 |
| 2 | 100N 100n | C_0603_1608Metric | C32, C35 |
| 2 | 22U 22u | C_1206_3216Metric | C33, C34 |
| 3 | 10N 10n | C_0603_1608Metric | C36, C37, C38 |
| 7 | 10K 10k | R_0603_1608Metric | R30, R31, R32, R33, R34, R35, R36 |
Control design files
The KiCad project lives in the hicancan/carbentra-smart-switch repository on GitHub; these links point at the commit this page was built from.
Control: common questions
What microcontroller does the Control use?
The Control is built around the ESP32-C3-MINI-1-N4X, from the ESP32 family.
How big is the Control PCB?
The Control measures 76 × 76 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Control?
24 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Control design files?
From the hicancan/carbentra-smart-switch repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Control design in my own project?
Yes, under the terms of its AGPL-3.0 license, which hicancan chose for the repository.
Can I test firmware for the Control without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in carbentra-smart-switch
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k