7 open source boards using the ESP32-C3-MINI-1-N4X

Real designs built with the ESP32-C3-MINI-1-N4X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the ESP32-C3-MINI-1-N4X

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-C3-MINI-1-N4X connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_4 pin is left unconnected on 5 of 5 designs.
  • The NC_7 pin is left unconnected on 5 of 5 designs.
  • The NC_9 pin is left unconnected on 5 of 5 designs.
  • The NC_10 pin is left unconnected on 5 of 5 designs.
GND_1pin 1Connected to: GND 80% · a signal 20%
GND_2pin 2Connected to: GND 80% · a signal 20%
3V3_3pin 3Connected to: 3.3V 80% · a signal 20%
NC_4pin 4Connected to: Not connected 100%
IO2_5pin 5Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
NC_7pin 7Connected to: Not connected 100%
EN_8pin 8Connected to: Signal 100%
  • Capacitor to GND on 80% · 1 µF (3), 100 nF (1)
  • Pull-up to 3.3V on 80% · 10 kΩ (4)
NC_9pin 9Connected to: Not connected 100%
NC_10pin 10Connected to: Not connected 100%
GND_11pin 11Connected to: GND 80% · a signal 20%
IO0_12pin 12Connected to: Signal 100%
  • Series resistor on 60% · 1 kΩ (2), 330 Ω (1)
  • Resistor to GND on 40% · 330 Ω (1), 1 MΩ (1)
IO1_13pin 13Connected to: A connector 40%
  • Pull-up to 3.3V on 60% · 5.1 kΩ (1), 10 kΩ (1), 100 kΩ (1)
GND_14pin 14Connected to: GND 80% · a signal 20%
NC_15pin 15Connected to: Not connected 100%
NC_17pin 17Connected to: Not connected 100%
IO5_19pin 19Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 68 Ω (1), 10 kΩ (1)
IO6_20pin 20Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 33 Ω (1), 10 kΩ (1)
IO8_22pin 22Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 5.1 kΩ (1)
IO9_23pin 23Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
NC_24pin 24Connected to: Not connected 100%
NC_25pin 25Connected to: Not connected 100%
NC_28pin 28Connected to: Not connected 100%
NC_29pin 29Connected to: Not connected 100%
NC_32pin 32Connected to: Not connected 100%
NC_33pin 33Connected to: Not connected 100%
NC_34pin 34Connected to: Not connected 100%
NC_35pin 35Connected to: Not connected 100%
GND_36pin 36Connected to: GND 80% · a signal 20%
GND_37pin 37Connected to: GND 80% · a signal 20%
GND_38pin 38Connected to: GND 80% · a signal 20%
GND_39pin 39Connected to: GND 80% · a signal 20%
GND_40pin 40Connected to: GND 80% · a signal 20%
GND_41pin 41Connected to: GND 80% · a signal 20%
GND_42pin 42Connected to: GND 80% · a signal 20%
GND_43pin 43Connected to: GND 80% · a signal 20%
GND_44pin 44Connected to: GND 80% · a signal 20%
GND_45pin 45Connected to: GND 80% · a signal 20%
GND_46pin 46Connected to: GND 80% · a signal 20%
GND_47pin 47Connected to: GND 80% · a signal 20%
GND_48pin 48Connected to: GND 80% · a signal 20%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esphome rgbcct led controller by mikelawrence, Safestep by 8-BitLab, Control by hicancan and Esphome fan controller by mikelawrence.

The ESP32-C3-MINI-1-N4X in open source designs

The gallery holds 7 open source boards using the ESP32-C3-MINI-1-N4X from 5 GitHub repositories; a typical one measures about 60.4 × 45 mm and carries around 48 components.

57% use four copper layers or more, and 71% carry an open source license.

The most starred is Esphome rgbcct led controller by mikelawrence.

Parts used alongside the ESP32-C3-MINI-1-N4X

Microcontrollers on boards using the ESP32-C3-MINI-1-N4X

What boards using the ESP32-C3-MINI-1-N4X are built for

ESP32-C3-MINI-1-N4X: common questions

Where can I find a ESP32-C3-MINI-1-N4X reference design?

Each of the 7 boards on this page is a real design using the ESP32-C3-MINI-1-N4X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ESP32-C3-MINI-1-N4X NC_4 pin connected?

The NC_4 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1-N4X.

How is the ESP32-C3-MINI-1-N4X NC_7 pin connected?

The NC_7 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1-N4X.

How is the ESP32-C3-MINI-1-N4X NC_9 pin connected?

The NC_9 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1-N4X.

What parts are used alongside the ESP32-C3-MINI-1-N4X?

The MPM3506AGQV-P, TPS613222ADBVR and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-C3-MINI-1-N4X use?

Most are built on ESP32 (7).

How big is a typical board using the ESP32-C3-MINI-1-N4X?

The median is 60.4 × 45 mm, and 43% are two-layer designs.

What is the most popular open source board using the ESP32-C3-MINI-1-N4X?

By GitHub stars, Esphome rgbcct led controller by mikelawrence, with 1 stars.

Can I simulate one of these boards using the ESP32-C3-MINI-1-N4X before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part