65 open source boards using the TLV1117LV33DCYR

Real designs built with the TLV1117LV33DCYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

65 boardsClear filters|Most starred

How designs wire the TLV1117LV33DCYR

Read from the KiCad layouts of 40 open source designs, one per repository: what each pin of the TLV1117LV33DCYR connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 33 of 40 designs, most often 1 µF (then 10 µF).
  • The OUT pin is tied to 3.3V on 14 of 15 designs.
GNDpin 1Connected to: GND 95%
VOpin 2Connected to: 3.3V 88%
  • Decoupling capacitor on 35% · 100 nF (10), 10 µF (4), 1 µF (4)
VIpin 3Connected to: 5V 90%
  • Decoupling capacitor on 83% · 1 µF (14), 10 µF (14), 100 nF (8)
OUTpin 4Connected to: 3.3V 93%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dual CPU Base Board by Twisted-Fields, TinyTapeout 4+ Demoboard by claynicholson, Acorn serial by Twisted-Fields and Emberone00-pcb by 256foundation.

The TLV1117LV33DCYR in open source designs

The gallery holds 65 open source boards using the TLV1117LV33DCYR from 41 GitHub repositories; a typical one measures about 84 × 70.7 mm and carries around 66 components.

78% use four copper layers or more, and 32% carry an open source license.

The most starred is Dual CPU Base Board by Twisted-Fields.

Microcontrollers on boards using the TLV1117LV33DCYR

TLV1117LV33DCYR: common questions

Where can I find a TLV1117LV33DCYR reference design?

Each of the 65 boards on this page is a real design using the TLV1117LV33DCYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLV1117LV33DCYR VI pin?

The VI pin has a decoupling capacitor on 33 of 40 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 40 open source designs using the TLV1117LV33DCYR.

How is the TLV1117LV33DCYR OUT pin connected?

The OUT pin is tied to 3.3V on 14 of 15 designs. Counted from the KiCad layouts of 40 open source designs using the TLV1117LV33DCYR.

What parts are used alongside the TLV1117LV33DCYR?

The W25Q32JVSSIQ, SC0914(13), 157112V12700, RP2040 and 74CBTLV3257PW,118 appear in the most repositories here.

Which microcontrollers do boards using the TLV1117LV33DCYR use?

Most are built on RP2040/RP2350 (31), ESP32 (17), STM32 (4) and Raspberry Pi (2).

How big is a typical board using the TLV1117LV33DCYR?

The median is 84 × 70.7 mm, and 22% are two-layer designs.

What is the most popular open source board using the TLV1117LV33DCYR?

By GitHub stars, Dual CPU Base Board by Twisted-Fields, with 419 stars.

Can I simulate one of these boards using the TLV1117LV33DCYR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part