ISA EMS
hightower70·ISA_EMS
About the ISA EMS PCB
ISA EMS is an open source PCB design by hightower70, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 104.1 × 102.9 mm, with 26 components from 11 distinct parts.
Other key parts include the AS6C4008-55PCN, 74LS139, 74LS245, 74LS688 and 74LS670. By type, the board carries 12 capacitors, 10 ICs, 2 connectors and 2 resistors.
From the project
2MByte 8-bit ISA EMS Memory Card for IBM PC XT compatible computers
This is a redesign of the lo-tech.co.uk 2Mb ISA EMS board with some changes:
- All thru-hole instead of SMD, while retaining a rather compact format - Simplified address decoding and storage circuits for less chip count
All design files and gerber files for PCB manufacturing are avaiable in the repository. The schematics schematics is also avaiable in PDF format.

Main components on the ISA EMS
ISA EMS bill of materials (BOM)
26 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AS6C4008-55PCN | DIP-32_W15.24mm | U1, U2, U3, U4 |
| 1 | 74LS139 | DIP-16_W7.62mm | U5 |
| 1 | 74LS245 | DIP-20_W7.62mm | U6 |
| 2 | 74LS688 | DIP-20_W7.62mm | U7, U10 |
| 2 | 74LS670 | DIP-16_W7.62mm | U8, U9 |
| 1 | ISA BUS | BUS_XT | J1 |
| 1 | EMS Address | PinHeader_2x04_P2.54mm_Vertical | J2 |
| 10 | 100nF | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C4, C5, C6, C7, C8, C9, C10 +2 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C2, C3 |
| 1 | 10k | R_Array_SIP9 | RN1 |
| 1 | 10k | R_Array_SIP5 | RN2 |
ISA EMS design files
The KiCad project lives in the hightower70/ISA_EMS repository on GitHub; these links point at the commit this page was built from.
- LayoutISA_EMS.kicad_pcb
- SchematicISA_EMS.kicad_sch
ISA EMS: common questions
How big is the ISA EMS PCB?
The ISA EMS measures 104.1 × 102.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ISA EMS?
26 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the ISA EMS design files?
From the hightower70/ISA_EMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ISA EMS design in my own project?
Yes, under the terms of its Apache-2.0 license, which hightower70 chose for the repository.