11 open source boards using the AS6C4008-55PCN
Real designs built with the AS6C4008-55PCN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Rosco m68k
rosco-m68k
160 × 100 mm74 partsBSD-3-Clause199
Mackerel-30
crmaykish
215 × 150 mm127 parts4LMIT94
Pico-Thing
markrvmurray
273 × 178 mm171 parts4LBSD-2-Clause0
Zak180
agkaminski
188 × 128.3 mm128 parts4LCC-BY-NC-4.00
Mackerel-10 v1
210 × 170 mm110 parts4LMIT94
Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1
Pico-Thing Mezzanine Board
59.7 × 49.5 mm5 parts4LBSD-2-Clause0
Mackerel-08 SBC v1
180 × 120 mm81 parts4LMIT94
68k nano single board computer
demik
127 × 90.8 mm49 parts2LCERN-OHL-P-2.027
RC107-68000 ROM RAM 1
MarkD833
101.6 × 53.3 mm28 parts4LCC-BY-NC-4.08
RC208-68000 BOOTROM RAM 2
101.6 × 53.3 mm20 parts4LCC-BY-NC-4.08
The AS6C4008-55PCN in open source designs
The gallery holds 11 open source boards using the AS6C4008-55PCN from 7 GitHub repositories; a typical one measures about 180 × 120 mm and carries around 81 components.
90% use four copper layers or more, and 64% carry an open source license.
The most starred is Rosco m68k by rosco-m68k.
Parts used alongside the AS6C4008-55PCN
What boards using the AS6C4008-55PCN are built for
AS6C4008-55PCN: common questions
Where can I find a AS6C4008-55PCN reference design?
Each of the 11 boards on this page is a real design using the AS6C4008-55PCN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AS6C4008-55PCN?
The 74HC245, 74LS138 and SST39SF040 appear in the most repositories here.
How big is a typical board using the AS6C4008-55PCN?
The median is 180 × 120 mm, and 10% are two-layer designs.
What is the most popular open source board using the AS6C4008-55PCN?
By GitHub stars, Rosco m68k by rosco-m68k, with 199 stars.
Can I simulate one of these boards using the AS6C4008-55PCN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.