Starforge-Dev-Board

HIIACODER·Starforge-Dev-Board·PCB/PCB.kicad_pcb

Starforge-Dev-Board layout, top view — open source RP2040/RP2350 board by HIIACODER

About the Starforge-Dev-Board

Starforge-Dev-Board is an open source RP2040/RP2350 PCB design by HIIACODER, published on GitHub under the MIT license. It is a 4-layer board measuring 21 × 51 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700T-3302E/TT and P25Q16SH-UXH-IR. By type, the board carries 17 capacitors, 7 resistors, 3 ICs, 3 connectors, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A simple RP2040 Dev Board

My goal with this project was to learn how to route properly and effectively on a PCB including how to manage decoupling caps and general power routing because that is what I struggle with. I also wanted a simple board to use for my projects.

This project should: - help me develop a base to apply to future projects - be a simple dev board I can use for other projects

Starforge-Dev-Board, from the project README
From the project README

Main components on the Starforge-Dev-Board

Starforge-Dev-Board bill of materials (BOM)

33 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2040
Raspberry Pi(树莓派)
U1
1
MCP1700T-3302E/TT
MCP1700x-330xxTT
U2
1
P25Q16SH-UXH-IR
W25Q128JVS
U3
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
HC-TYPE-C-16P-01A
USB_C_Receptacle_USB2.0_16P
J1
2
HEADER-MALE-2.54_1X20
Conn_01x20
J2, J3
1
HEADER-MALE-2.54_1X3
Debug
XFCN(兴飞)
H1
1
TS-1088-AR02016
SW_Push
SW1
2
1UF
1uF
C1, C10
11
100NF
100nF
C2, C3, C4, C5, C6, C7, C8, C9 +3
2
10UF
10uF
C13, C14
2
33PF
33pF
C15, C16
2
5.1K
5.1k
R1, R2
1
10K
10k
R3
2
1k
R4, R7
2
27R
27
R5, R6

Starforge-Dev-Board design files

The KiCad project lives in the HIIACODER/Starforge-Dev-Board repository on GitHub; these links point at the commit this page was built from.

Starforge-Dev-Board: common questions

What microcontroller does the Starforge-Dev-Board use?

The Starforge-Dev-Board is built around the RP2040, from the RP2040/RP2350 family.

How big is the Starforge-Dev-Board?

The Starforge-Dev-Board measures 21 × 51 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Starforge-Dev-Board?

33 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starforge-Dev-Board design files?

From the HIIACODER/Starforge-Dev-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starforge-Dev-Board design in my own project?

Yes, under the terms of its MIT license, which HIIACODER chose for the repository.

Can I test firmware for the Starforge-Dev-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards