S3DUCKY
himanivishwa·S3DUCKY·hardware/s3-ducky.kicad_pcb
About the S3DUCKY PCB
S3DUCKY is an open source ESP32 PCB design by himanivishwa, published on GitHub. It is a 2-layer board measuring 33.2 × 36.7 mm, with 19 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LD1117V. By type, the board carries 5 capacitors, 4 resistors, 3 connectors, 3 diodes, 2 ICs and 2 switches.
It belongs with the iot & wireless, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
A pocket-sized USB HID injection tool built on the ESP32-S3's native USB peripheral — no separate USB-serial or "Digispark"-style bootloader chip needed. Plug it in, and it enumerates as a keyboard.
A pocket-sized USB HID injection tool built on the ESP32-S3's native USB peripheral — no separate USB-serial or "Digispark"-style bootloader chip needed. Plug it in, and it enumerates as a keyboard.
I had no experience in making devboards from esp32 dev modules so this is the best practical project i could think of aside from making a simple devboard
- Native USB HID keyboard — the ESP32-S3's built-in USB-OTG peripheral emulates a keyboard directly; no USB-to-serial bridge or second MCU in the path. - ESP32-S3-WROOM-1 module — also brings Wi-Fi and BLE on board for future expansion (e.g.…

Main components on the S3DUCKY
S3DUCKY bill of materials (BOM)
19 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | LD1117V | SOT-223-3_TabPin2 | U2 |
| 2 | Conn_01x11_Pin | PinHeader_1x11_P2.54mm_Vertical | J1, J3 |
| 1 | USB_A | USB-AM-TH_AM90 | J2 |
| 2 | SW_Push | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 1 | GREEN | LED_0805_2012Metric | D2 |
| 1 | BLUE | LED_0805_2012Metric | D3 |
| 2 | 100nF | C_0805_2012Metric | C1, C7 |
| 2 | 10uF | C_0805_2012Metric | C2, C5 |
| 1 | 22uF | C_0805_2012Metric | C6 |
| 4 | 5.1k | R_0805_2012Metric | R3, R4, R5, R6 |
S3DUCKY design files
The KiCad project lives in the himanivishwa/S3DUCKY repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/s3-ducky.kicad_pcb
- Schematichardware/s3-ducky.kicad_sch
- BOMBOM/BOMS3DUCKY.csv
S3DUCKY: common questions
What microcontroller does the S3DUCKY use?
The S3DUCKY is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the S3DUCKY PCB?
The S3DUCKY measures 33.2 × 36.7 mm, has 2 copper layers and is 1.600198 mm thick.
How many components are on the S3DUCKY?
19 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the S3DUCKY design files?
From the himanivishwa/S3DUCKY repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the S3DUCKY design in my own project?
The repository has no license, so all rights stay with himanivishwa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the S3DUCKY without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k